Sanyo DSR-C100 instruction manual Setting the Clock Clock SET, Before setting

Page 23

SETTING THE CLOCK (CLOCK SET)

You need to set the date and time in order to use the camera. The recording functions of this camera cannot be used if the date and time have not been set. In addition, if the accessory Ni-Cd battery (for backup) which is used for running the clock and for hard disk backups has been replaced, you must reset the clock.

The setting time is displayed when “CONDITION” is selected from the MAIN MENU screen.

CONDITION

TIME: 08/02/2002 15:34:26

PRE: 15MIN

POST: 30MIN

SUSPICION:

150/

6834PCS

FRAMERATE: 3FPS

ST/DL: ON

FILE ID: A

 

ID:

COMMENT:

 

 

[MENU]

(MAIN MENU)

Note: The clock is set when the camera is first used, but if summer time has been set, the time will advance by one hour automatically during the summer time application period, so you may need to reset the clock.

Setting example: To set the clock to 15:15:20 on 2 August 2002

Press the MENU button to return to the SETTING screen.

1Use the CURSOR (l) button to select “SETTINGS” and then press the SET button. The SETTINGS screen will be displayed.

2Use the CURSOR (l) button to select “CLOCK SET” and then press the SET button.

The CLOCK SET screen will be displayed.

5Use the CURSOR (l) button to select “DAY ... 01” and then use the CURSOR (d or c) button to set the day to “02”.

6Use the CURSOR (l) button to select “HOUR ... 00” and then use the CURSOR (dor c) button to set the hour to “15”.

7Use the CURSOR (l) button to select “MINUTE ... 00” and then use the CURSOR (dor c) button to set the minutes to “15”.

8Use the CURSOR (l) button to select “SECOND ... 00” and then use the CURSOR (dor c) button to set the seconds to “20”.

9Use the CURSOR (l) button to select “FORM ... MM/DD/YYYY” and then use the CURSOR (dor c) button to set the desired format.

YYYY/MM/DD: Year/Month/Day

MM/DD/YYYY: Month/Day/Year

DD/MM/YYYY: Day/Month/Year

(CLOCK SET)

YEAR------------------

2001

MONTH-----------------

01

DAY-------------------

01

HOUR------------------

00

MINUTE----------------

00

SECOND----------------

00

FORM-----------

MM/DD/YYYY

CLOCK START-----------

YES

(CLOCK SET)

YEAR------------------

2002

MONTH-----------------

08

DAY-------------------

02

HOUR------------------

15

MINUTE----------------

15

SECOND----------------

20

FORM-----------

MM/DD/YYYY

CLOCK START-----------

YES

10 Use the CURSOR (l) button to select “CLOCK START ... YES” and then press the SET button.

The CLOCK START screen will be displayed, and the date and time which have been set will appear on the screen. The camera will

(Before setting)

(After setting)

return to recording mode after approximately 30 seconds.

3

4

Use the CURSOR (l) button to select “YEAR ... 2001” and then use the CURSOR (dor c) button to set the year to “2002”.

Use the CURSOR (l) button to select “MONTH ... 01” and then use the CURSOR (dor c) button to set the month to “08”.

If you select “NO”, the clock setting will not be changed, and the screen will return to the SETTINGS screen.

(CLOCK START)

2002/08/02 15:15:20

22

English

Image 23
Contents DSR-C100 Contents Formatting the memory card Function OperationsDeclaration of Conformity Information to UserPrecautions Accessories FeaturesPart Names and Functions Front Panel Control terminals OFF Indicator Monitor display Camera statusMonitor display Camera status Ni-Cd Backup Battery Installing and HandlingInstalling the Ni-Cd battery Basic connections Hold-up switch B Suspicion switchConnecting the power supply ConnectionsComputer Connection to a computerRS-232C cable connection Hard disk recording areas Hard DiskChecking the hard disk Protecting the hard diskFrom Recording to Playback Turn on the power. See page 1Press the Menu button Hard Disk Standby ModeSetting to standby mode Canceling standby modeMemo Menu Settings Menu screen display BClock settings BSystem settingsBefore setting Setting the Clock Clock SETSetting example To set the clock to 151520 on 2 August System Settings System SET Palette Hard disk initializationChanging the alarm capacity Hard Disk Capacity Settings HDD SETUse the Cursor l button to select Minute Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Week SUN Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word SET File ID a Camera ID Comment KEY Word Setting KEY Word SETPress the SET button Entering a file ID 1 characterEnter ALL1 in same way Setting a camera ID 5 charactersEntering a comments up to 36 characters Button Example Set the password to CameraUse the Cursor jor l button to select Change PASSWORD-DELETE OLD Password Example To change the initial setting of END to CMR Setting a password for initializing the hard diskOLD Password Correcting characters For Camera ID and Comment settingsFor Password or Camera ID setting 4Checking the Summer TIME/DAYLIGHT SET settings 1Checking the Clock SET settings2Checking the HDD SET settings 3Checking the System SET settingsImage quality Setting the Recording MethodIllumination Post-alarm POST-1 recording Pre-alarm PRE1 recordingSuspicion recording Pre-alarm recording flow 2Number of suspicion recording images Pre-alarm recordingScreen displays 1Display during recordingRelease the H HOLD-UP switch to stop recording Post-alarm recordingPress and hold the H HOLD-UP switch rear panel Pre-alarm 2 PRE2 recording starts automatically Backup recording