Sanyo DSR-C100 instruction manual Setting a camera ID 5 characters, Enter ALL1 in same way

Page 31

Setting a camera ID (5 characters)

Example: To set the camera ID to “HALL1”

1Use the CURSOR (lor j) button to select “SETTINGS” and then press the SET button.

The SETTINGS screen will be displayed.

2Use the CURSOR (jor l) button to select “KEY WORD SET” and then press the SET button.

The KEY WORD SET screen will be displayed.

3Use the CURSOR (l) button to select “CAMERA ID” and then press the SET button.

You can then set the camera ID in the KEY WORD SET screen.

(KEY WORD SET) FILE ID :P

SET CAMERA ID:

COMMENT :

CHANGE PASSWORD (DELETE)

CHANGE PASSWORD (INITIAL)

(KEY WORD SET)

CAMERA ID:

ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789., /-$&#'”() END

5

6

Press the SET button.

The display will return to the KEY WORD SET screen.

When all settings have been completed, press the MENU button to return to the SETTINGS screen.

Keep pressing the MENU button to return to the MAIN MENU screen.

4Use the CURSOR button to select the characters “H” in order from the character palette, and the press the SET button.

Enter “ALL1” in same way.

When five characters have been selected, the cursor will move automatically to “END”.

SET

(KEY WORD SET)

CAMERA ID:HALL1

30

English

Image 31
Contents DSR-C100 Contents Formatting the memory card Function OperationsDeclaration of Conformity Information to UserPrecautions Accessories FeaturesPart Names and Functions Front Panel Control terminals OFF Indicator Monitor display Camera statusMonitor display Camera status Ni-Cd Backup Battery Installing and HandlingInstalling the Ni-Cd battery Basic connections Hold-up switch B Suspicion switchConnecting the power supply ConnectionsRS-232C cable connection Connection to a computerComputer Hard disk recording areas Hard DiskChecking the hard disk Protecting the hard diskFrom Recording to Playback Turn on the power. See page 1Press the Menu button Hard Disk Standby ModeSetting to standby mode Canceling standby modeMemo Menu Settings Menu screen display BClock settings BSystem settingsSetting example To set the clock to 151520 on 2 August Setting the Clock Clock SETBefore setting System Settings System SET Palette Hard disk initializationChanging the alarm capacity Hard Disk Capacity Settings HDD SETUse the Cursor l button to select Week SUN Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Minute Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word SET File ID a Camera ID Comment KEY Word Setting KEY Word SETPress the SET button Entering a file ID 1 characterEnter ALL1 in same way Setting a camera ID 5 charactersEntering a comments up to 36 characters Use the Cursor jor l button to select Example Set the password to CameraButton Change PASSWORD-DELETE OLD Password Example To change the initial setting of END to CMR Setting a password for initializing the hard diskOLD Password For Password or Camera ID setting For Camera ID and Comment settingsCorrecting characters 4Checking the Summer TIME/DAYLIGHT SET settings 1Checking the Clock SET settings2Checking the HDD SET settings 3Checking the System SET settingsIllumination Setting the Recording MethodImage quality Post-alarm POST-1 recording Pre-alarm PRE1 recordingSuspicion recording Pre-alarm recording flow 2Number of suspicion recording images Pre-alarm recordingScreen displays 1Display during recordingPress and hold the H HOLD-UP switch rear panel Post-alarm recordingRelease the H HOLD-UP switch to stop recording Pre-alarm 2 PRE2 recording starts automatically Backup recording