Sanyo DSR-C100 instruction manual Setting a password for initializing the hard disk

Setting a password for initializing the hard disk

(CHANGE PASSWORD (INITIAL))

This password is used when “INITIALIZE” is selected from the HDD SET screen.

Example: To change the initial setting of “END” to “CMR”

1

2

3

Use the CURSOR (lor j) button to select “SETTINGS” and then press the SET button.

The SETTINGS screen will be displayed.

Use the CURSOR (jor l) button to select “KEY WORD SET” and then press the SET button.

The KEY WORD SET screen will be displayed.

Use the CURSOR (l) button to select “CHANGE PASSWORD (INITIAL)” and then press the SET button.

The cursor will move to the “OLD

PASSWORD” box in the CHANGE

PASSWORD-INITIALIZE screen.

4Use the CURSOR (l) button to select “END” and then press the SET button. The initial setting “END” will be cleared and the cursor will move to the “NEW PASSWORD” box.

(CHANGE PASSWORD-INITIALIZE)			(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:			OLD PASSWORD:
NEW PASSWORD:			NEW PASSWORD:
VERIFICATION:			VERIFICATION:
ABCDEFGHIJKLM			ABCDEFGHIJKLM
NOPQRSTUVWXYZ			NOPQRSTUVWXYZ
0123456789		0123456789
	BS END			BS END
			SET

(KEY WORD SET)		(CHANGE PASSWORD-INITIALIZE)
FILE ID :P		OLD PASSWORD:
CAMERA ID:HALL1		NEW PASSWORD:
COMMENT :SANYO DIGITAL		VERIFICATION:
RECORDING CAMERA
CHANGE PASSWORD (DELETE)		ABCDEFGHIJKLM
CHANGE PASSWORD (INITIAL)		NOPQRSTUVWXYZ
	0123456789
			BS END
		SET

5Use the CURSOR button to select “C” and then press the SET button.

The selected letter will appear as “ö”. Enter “MR” in the same way.

(CHANGE PASSWORD-INITIALIZE)			(CHANGE PASSWORD-INITIALIZE)
OLD PASSWORD:			OLD PASSWORD:
NEW PASSWORD:*			NEW PASSWORD:***
VERIFICATION:			VERIFICATION:
ABCDEFGHIJKLM			ABCDEFGHIJKLM
NOPQRSTUVWXYZ			NOPQRSTUVWXYZ
0123456789		0123456789
	BS END			BS END

SET

34 English