Sanyo DSR-C100 Post-alarm recording, Press and hold the H HOLD-UP switch rear panel

Page 44

SETTING THE RECORDING METHOD

Post-alarm recording

1Press the MENU button.

The MAIN MENU screen will be displayed.

2Use the CURSOR (jor l) button to select “RECORD START” and then press the SET button.

The warning indicator and caution indicator both light during post-alarm recording.

“PRE1-ALARM REC” will be displayed and pre-alarm (PRE1) recording will then start.

3Press and hold the H (HOLD-UP) switch (rear panel).

“POST1-ALARM REC” will be displayed and post-alarm 1 (POST1) recording will start.

Post-alarm recording will stop when the hold-up switch is released, or when the post-alarm recording time which was initially set has passed.

MENU

SET

(MAIN MENU)

RECORD START

PLAYBACK

SETTINGS

CONDITION

PRE1-ALARM REC

REMAIN SHOTS: 6834

POST1-ALARM REC

REMAIN SHOTS: 6834

4Release the H (HOLD-UP) switch to stop recording.

•

•

If there is 20 minutes or more of available recording time remaining in the post-alarm recording area, pre-alarm 2 (PRE2) recording starts automatically.

When the recording area becomes full, “ALARM REC FULL” will be displayed and recording will no longer be possible.

English

43

Image 44

Contents DSR-C100 Contents Function Operations Formatting the memory cardInformation to User Declaration of ConformityPrecautions Features AccessoriesPart Names and Functions Front Panel Control terminals Indicator Monitor display Camera status OFFMonitor display Camera status Installing and Handling Ni-Cd Backup BatteryInstalling the Ni-Cd battery Hold-up switch B Suspicion switch Connecting the power supplyConnections Basic connectionsComputer Connection to a computerRS-232C cable connection Hard Disk Hard disk recording areasProtecting the hard disk Checking the hard diskTurn on the power. See page 1 From Recording to PlaybackHard Disk Standby Mode Setting to standby modeCanceling standby mode Press the Menu buttonMemo Menu Settings BClock settings BSystem settings Menu screen displayBefore setting Setting the Clock Clock SETSetting example To set the clock to 151520 on 2 August System Settings System SET Hard disk initialization PaletteHard Disk Capacity Settings HDD SET Changing the alarm capacityUse the Cursor l button to select Minute Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Week SUN Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word Setting KEY Word SET KEY Word SET File ID a Camera ID CommentEntering a file ID 1 character Press the SET buttonSetting a camera ID 5 characters Enter ALL1 in same wayEntering a comments up to 36 characters Button Example Set the password to CameraUse the Cursor jor l button to select Change PASSWORD-DELETE OLD Password Setting a password for initializing the hard disk Example To change the initial setting of END to CMROLD Password Correcting characters For Camera ID and Comment settingsFor Password or Camera ID setting 1Checking the Clock SET settings 2Checking the HDD SET settings3Checking the System SET settings 4Checking the Summer TIME/DAYLIGHT SET settingsImage quality Setting the Recording MethodIllumination Pre-alarm PRE1 recording Post-alarm POST-1 recordingSuspicion recording Pre-alarm recording flow Pre-alarm recording Screen displays1Display during recording 2Number of suspicion recording imagesRelease the H HOLD-UP switch to stop recording Post-alarm recordingPress and hold the H HOLD-UP switch rear panel Backup recording Pre-alarm 2 PRE2 recording starts automatically