Sanyo DSR-C100 instruction manual Precautions

Page 5

PRECAUTIONS

In case of problems

Do not use the camera if smoke or a strange odor comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage to the unit. For internal settings and repairs, consult your dealer (or a Sanyo Authorized Service Centre).

Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside the camera. If used with a foreign object inside, it could cause a fire, short-circuits or damages.

If water or other liquid gets inside the camera, disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Centre). Be careful to protect the camera from rain, seawater, etc.

Be careful when handling the unit

To prevent damage, do not drop the camera or subject it to strong shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor, transformer, or audio speakers, the magnetic field they generate may distort the image.

Protect from humidity and dust

To prevent damage to the camera, do not install it where there is greasy smoke or steam, where the dampness may get too high, or where there is a lot of dust.

Protect from high temperatures

Do not install close to stoves or other heat generating devices, such as spotlights, or where the camera could be subject to direct sunlight, as that could cause deformation, discoloration or other damage.

Be careful when installing close to the ceiling in a kitchen or boiler room, as the temperature may rise to high levels.

Install where the temperature range will stay between 5˚C and 40˚C. (no condensation)

Cleaning

Dirt can be removed from the cabinet by wiping it with a soft cloth. To remove stains, wipe with a soft cloth moistened with a neutral detergent solution and wrung dry, then wipe dry with a dry soft cloth.

Do not use solvents, thinner or other chemical product on the cabinet, as that may cause deformation and paint peeling. Before using a chemical cloth, make sure to read all accompanying instructions. Make sure that no plastic or rubber material comes in contact with the cabinet for a long period of time, as that may cause damage or paint peeling.

IMPORTANT NOTE:

The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates SANYO is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call

1-800-822-8837 for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. SANYO's involvement in this program is part of our commitment to preserving our environment and conserving our natural resources.

4

English

Image 5
Contents DSR-C100 Contents Formatting the memory card Function OperationsDeclaration of Conformity Information to UserPrecautions Accessories FeaturesPart Names and Functions Front Panel Control terminals OFF Indicator Monitor display Camera statusMonitor display Camera status Ni-Cd Backup Battery Installing and HandlingInstalling the Ni-Cd battery Connecting the power supply Hold-up switch B Suspicion switchConnections Basic connectionsComputer Connection to a computerRS-232C cable connection Hard disk recording areas Hard DiskChecking the hard disk Protecting the hard diskFrom Recording to Playback Turn on the power. See page 1Setting to standby mode Hard Disk Standby ModeCanceling standby mode Press the Menu buttonMemo Menu Settings Menu screen display BClock settings BSystem settingsBefore setting Setting the Clock Clock SETSetting example To set the clock to 151520 on 2 August System Settings System SET Palette Hard disk initializationChanging the alarm capacity Hard Disk Capacity Settings HDD SETUse the Cursor l button to select Minute Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Week SUN Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word SET File ID a Camera ID Comment KEY Word Setting KEY Word SETPress the SET button Entering a file ID 1 characterEnter ALL1 in same way Setting a camera ID 5 charactersEntering a comments up to 36 characters Button Example Set the password to CameraUse the Cursor jor l button to select Change PASSWORD-DELETE OLD Password Example To change the initial setting of END to CMR Setting a password for initializing the hard diskOLD Password Correcting characters For Camera ID and Comment settingsFor Password or Camera ID setting 2Checking the HDD SET settings 1Checking the Clock SET settings3Checking the System SET settings 4Checking the Summer TIME/DAYLIGHT SET settingsImage quality Setting the Recording MethodIllumination Post-alarm POST-1 recording Pre-alarm PRE1 recordingSuspicion recording Pre-alarm recording flow Screen displays Pre-alarm recording1Display during recording 2Number of suspicion recording imagesRelease the H HOLD-UP switch to stop recording Post-alarm recordingPress and hold the H HOLD-UP switch rear panel Pre-alarm 2 PRE2 recording starts automatically Backup recording