Sanyo DSR-C100 instruction manual Hard Disk Capacity Settings HDD SET, Changing the alarm capacity

Page 26

HARD DISK CAPACITY SETTINGS (HDD SET)

Changing the alarm capacity

After the hard disk has been initialized and when no post-alarm images have yet been recorded in the pre-alarm recording area of the hard disk, “SPACE SET” will be displayed on the screen.

If “SPACE SET” is displayed on the screen, you can then change the alarm capacity. If images have been recorded in the post-alarm recording area, then the alarm capacity cannot be changed. Delete the alarm images or initialize the hard disk before changing the alarm recording area capacity.

1Use the CURSOR (jor l) button to select “SETTINGS” and then press the SET button.

The SETTINGS screen will be displayed.

2Use the CURSOR (jor l) button to select “HDD SET” and then press the SET button.

The HDD SET screen will be displayed.

3Use the CURSOR (jor l) button to select “SPACE SET” and then press the SET button.

The SPACE SET screen will be displayed.

4Use the CURSOR button to reset the capacity of the alarm recording area. Example:

1 Set the PRE ALARM item to 30 minutes.

2Set the POST ALARM item to 40 minutes. The “SUSPICION SHOTS” and “ALARM TIME” settings will be made automatically.

Note: If some images have already been recorded in the suspicion recording area, the setting time for the alarm recording capacity will change.

5Use the CURSOR (jor l) button to select “SETUP” and then use the CURSOR (dor c) button to select “YES” and then press the SET button.

The capacity of the alarm recording area will be changed, and the SPACE SET screen will be displayed.

If you select “NO”, the display will return to the HDD SET screen.

(SPACE SET)

 

(SPACE SET)

 

<SUSPICION SHOTS: 3456PCS>

<SUSPICION SHOTS: 3456PCS>

<ALARM TIME

70MIN>

<ALARM TIME

70MIN>

PRE ALARM

30

MIN

PRE ALARM

30

MIN

POST ALARM

40

MIN

POST ALARM

40

MIN

SETUP

YES

 

SETUP

YES

 

DO NOT POWER OFF!

SETTING NOW!

(HDD SET)

<SUSPICION SHOTS: 6834PCS>

<ALARM TIME

45MIN>

<PRE ALARM

15MIN>

<POST ALARM

30MIN>

SPACE SET

INITIALIZE

[MENU] (SETTINGS)

(SPACE SET)

<SUSPICION SHOTS: 3456PCS>

<ALARM TIME

70MIN>

PRE ALARM

30

MIN

POST ALARM

40

MIN

SETUP

NO

 

English

25

Image 26
Contents DSR-C100 Contents Function Operations Formatting the memory cardInformation to User Declaration of ConformityPrecautions Features AccessoriesPart Names and Functions Front Panel Control terminals Indicator Monitor display Camera status OFFMonitor display Camera status Installing and Handling Ni-Cd Backup BatteryInstalling the Ni-Cd battery Connections Hold-up switch B Suspicion switchConnecting the power supply Basic connectionsComputer Connection to a computerRS-232C cable connection Hard Disk Hard disk recording areasProtecting the hard disk Checking the hard diskTurn on the power. See page 1 From Recording to PlaybackCanceling standby mode Hard Disk Standby ModeSetting to standby mode Press the Menu buttonMemo Menu Settings BClock settings BSystem settings Menu screen displayBefore setting Setting the Clock Clock SETSetting example To set the clock to 151520 on 2 August System Settings System SET Hard disk initialization PaletteHard Disk Capacity Settings HDD SET Changing the alarm capacityUse the Cursor l button to select Minute Use the Cursor dor c button to set Mode ... onUse the Cursor l button to select Week SUN Summer Time Settings Summer TIME/DAYLIGHT SET KEY Word Setting KEY Word SET KEY Word SET File ID a Camera ID CommentEntering a file ID 1 character Press the SET buttonSetting a camera ID 5 characters Enter ALL1 in same wayEntering a comments up to 36 characters Button Example Set the password to CameraUse the Cursor jor l button to select Change PASSWORD-DELETE OLD Password Setting a password for initializing the hard disk Example To change the initial setting of END to CMROLD Password Correcting characters For Camera ID and Comment settingsFor Password or Camera ID setting 3Checking the System SET settings 1Checking the Clock SET settings2Checking the HDD SET settings 4Checking the Summer TIME/DAYLIGHT SET settingsImage quality Setting the Recording MethodIllumination Pre-alarm PRE1 recording Post-alarm POST-1 recordingSuspicion recording Pre-alarm recording flow 1Display during recording Pre-alarm recordingScreen displays 2Number of suspicion recording imagesRelease the H HOLD-UP switch to stop recording Post-alarm recordingPress and hold the H HOLD-UP switch rear panel Backup recording Pre-alarm 2 PRE2 recording starts automatically