Nikon 2160, 4129 Vibration reduction mode VR@, Basic concept of vibration reduction

En

3. Vibration reduction mode (VR@)

■Basic concept of vibration reduction

vibrationsof	Camera shake
Number	Panning shots

Strength of vibration

■The effects of vibration reduction

•When the subject is from infinity (∞) to approx. 3m (9.8 ft.) away (at 1/30x reproduction ratio), pictures can be taken at shutter speeds approx. 4 stops* slower than is possible without using a VR2 lens. As the reproduction ratio increases from 1/30x, the effects of vibration reduction gradually decrease. (*Under Nikon measurement conditions. The effects of vibration reduction vary depending on

individual and shooting conditions.)

■Setting the vibration reduction ON/OFF switch

1 Set the Vibration reduction ON/OFF switch # to [ON].

Note: Be sure to set the switch so that the indicator aligns with [ON] precisely.

2 Vibration is reduced when the shutter release button is lightly pressed. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are made easier.

3 To cancel the vibration reduction mode, set the Vibration reduction ON/OFF switch # to [OFF].

Indicator

ONOFF

■Notes on using vibration reduction mode

•Wait until the image in the viewfinder stops vibrating before fully depressing the shutter release button after you have lightly pressed the shutter release button.

•If you move the camera in a wide arc when panning, vibration in the direction of that movement is not affected. For example, if you pan the camera horizontally, only vibration in the vertical direction is reduced, making smooth pans much easier.

20