•When using the B and E focusing screens in cameras other than those listed above, refer to the columns for the B and E screens.
11. Lens care
•Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens
En | cleaner. Wipe in a circular motion from center to outer edge, taking care not to leave | |
traces or touch other parts of the lens. | ||
|
•Never use thinner or benzene to clean the lens as this might damage it, result in a fire, or cause health problems.
•To protect the front lens element, an NC filter is available. A lens hood 1 also helps protect the front of the lens.
•When storing the lens in its lens case, attach both front and rear caps.
•When the lens will not be used for a long time, store it in a cool, dry place to prevent mold. Also store the lens away from direct sunlight or chemicals such as camphor or naphthalene.
•Do not get water on the lens or drop it in water as this will cause it to rust and malfunction.
•Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave the lens in an excessively hot place.
12. Standard accessories
• 62mm
• Bayonet hood
13. Optional accessories
•62mm screw-in filters, including circular polarizing filter II
•
14. Incompatible accessories
•Auto Ring
Other accessories may not be suitable for use with this lens. For details, carefully read your accessories instruction manual.
24