Polaroid Image1200 Repeated spots or bar Pattern Cause Solution, Damaged picture Cause Solution

Page 14

English

Repeated spots or bar
pattern	Cause	Solution

Developer rollers inside the ﬁlm door need to be cleaned.

Open ﬁlm door in indirect light (do not remove ﬁlm). While turning rollers, clean them with a lint-free cloth damp- ened with water.

Damaged picture

Cause

Solution

Picture was shaken back and forth or bent shortly after it was ejected from the camera.

Picture was left in the exit slot, and camera was set down on a table or other surface.

During ﬁrst 60 seconds of development, handle print gently; hold it only by its wide white border, and do not wave or bend it.

Remove print from exit slot as soon as it ejects.

Subject too dark

Cause

Solution

Camera’s photocell measured the bright window light, causing the subject to be too dark.

Reposition subject away from the bright background.

When a bright source of light (lamplight, candlelight, etc.) is in the central part of the scene and in front of the subject, the camera’s photocell will measure the bright light, causing the subject to be too dark.

Move the source of light to one side of your subject so it is not in the central part of the scene.

13

Image 14

Contents Page English Page English Opening and Closing the Camera Do not force cover open as it will damage cameraLoading and Unloading the Film Loading the Batteries Digital Viewﬁnder Operation Taking Pictures with the Digital Viewﬁnder Taking Pictures with the Optical ViewﬁnderUsing Self-timer If the ﬂash or focus is not correctOther Features Exposure Control Taking Photos with Reﬂective BackgroundsCamera Maintenance Developing PhotosBlurry Picture Cause Solution Guide to better picturesSubject too dark Cause Solution Repeated spots or bar Pattern Cause SolutionDamaged picture Cause Solution Warranty One-year limited warranty Picture too blue or too red/yellow Cause SolutionEspañol Apertura y cierre de la cámara No fuerce la cubierta al cerrarla ya que podríaCarga y descarga de la película Carga de las pilas Funcionamiento del visor digital Realización de fotografías con el visor digital Realización de fotografías con el visor ópticoEn caso de que el ﬂash o el enfoque no sean correctos Utilización del disparador automáticoRealización de fotografías con fondos luminosos Otras características Control de exposiciónMantenimiento de la cámara Revelar fotografíasGuía para conseguir mejores imágenes Imagen borrosa Causa SoluciónObjeto muy oscuro Causa Solución Manchas repetidas Rayas Causa SoluciónFotografías dañadas Causa Solución Garantía Garantía limitada de un año PrecauciónFrançais Ouverture et fermeture de l’appareil NE PAS forcer l’ouverture au risque d’endommager l’appareilChargement et retrait du ﬁlm Chargement des piles Fonctionnement du viseur numérique Prises de vue avec le viseur numérique Prises de vues avec le viseurSi le ﬂash ou la mise au point sont incorrects Déclencheur à retardementAutres fonctions Contrôle de l’exposition Entretien de l’appareil Développement des photosPhoto ﬂoue Cause Solution Guide du parfait photographeSujet sous-exposé Cause Solution Taches et rayures Cause SolutionPhoto abîmée Cause Solution Avertissement Image trop bleue ou Trop rouge/orange Cause SolutionGarantie Garantie limitée à un an