SVAT Electronics CV503-8CH Start Record, Stop Record, Start Cruise, Start Auto Sequencing

SHORTCUT MENU	SVAT ELECTRONICS
	nowyoucansee

Start Record

•Selecting this prompts the LCD-DVR to begin manual recording (if it is not already recording). Selecting this will override any set recording schedule

Stop Record

•Selecting this prompts the LCD-DVR to stop manual recording

Start Cruise

•Selecting this option prompts the PTZ cruise to start (if you have configured a compatible PTZ camera). Selecting the cruise option again will stop the PTZ cruise

Start Auto Sequencing

•Selecting this option prompts the cameras to sequence through each camera displayed on full screen. This function will only work if you have more than one camera connected. Double click the screen to stop the automatic sequencing. For more information, please see Camera Sequence on page 19

PIP Mode

Picture-in-picture (PIP) allows you to view one camera in full screen and up to two other channels (of your choice) in smaller windows on the bottom corners of your screen. You must have at least two cameras connected to your LCD- DVR to utilize PIP Mode.

Operating PIP Mode:

1.Scroll to “PIP Mode,” once highlighted, two options will appear: “1 X 1” and “1 X 2.”

2.Selecting “1 X 1” will display a second channel in the bottom-left corner of the screen, while “1 x 2” will display a second and third channel on the two bottom-left and right corners of the screen.

3.To select which camera you are viewing in the picture-in-picture, left click the smaller image to cycle through to the desired channel.

4.To exit “PIP Mode,” right click the mouse.

PIP Mode 1x1 PIP Mode 1x2

CV503-8CH-19M 14