SVAT Electronics CV503-8CH Record function, ’clock PM, Function off, Power source, Turned off

Page 82

 

TROUBLESHOOTING

SVAT ELECTRONICS

 

 

 

nowyoucansee

 

 

 

 

 

Cannot power off LCD-DVR

• The DVR will run as long as it is plugged in and power switch is set to on.

 

 

Flip power switch to off or remove plug to turn off power to LCD- DVR

 

 

 

 

 

 

• Check to see if you have the proper time set on your DVR. Refer to the

 

 

The schedule is not recording

instruction manual under System → Date and Time (Pg. 35)

 

 

• Double check your schedule record times – you may have it set on the no

 

 

properly to my set times

record function

 

 

 

 

• Remember that the DVR works on a 24 hour clock. 13:00 would be 1

 

 

 

O’clock PM

 

 

 

There is a beeping noise

• Buzzer is set to on, go to the alarm set up and turn the buzzer

 

 

whenever motion is detected

function off

 

 

 

 

• Check if the cameras are properly connected to the LCD-DVR and to a

 

 

I cannot see (all/one) of the

power source

 

 

 

• If using the 4 to 1 power connector, make sure it is plugged into a power

 

 

camera(s) on the monitor

source and each of the cameras

 

 

 

 

• Check Camera Setup from the main menu to see if any of the cameras are

 

 

 

turned off

 

 

 

 

• This could be from lost footage due to tampering of cameras. Make sure

 

 

 

to check all connections are secure and set properly

 

 

I have lost video footage

• This could be because HDD overwrite is enabled. This means that once the

 

 

HDD is full the DVR will begin overwriting the earliest stored footage

 

 

 

 

 

 

• Try unplugging the power to the cameras and/or DVR and plugging it

 

 

 

back in

 

 

 

 

• Check the video quality you are using. If you are using a high video quality

 

 

The hard drive is filling up too

then the hard drive will fill up faster. Trying lowering the video quality

 

 

• Adjust your schedule or resolution – If you are on Normal Record for 24

 

 

quickly

 

 

hours a day the hard drive will fill

up faster. Try switching some times to

 

 

 

 

 

 

alarm record

 

 

 

I am prompted to put in a

• This is because you have the password enable set to ON in the

 

 

password for everything

system menu

 

 

 

My DVR is connected to my

• Check Ethernet connections, ensure that the connection lights are on (on

 

 

router, and both devices have

router and back of DVR)

 

 

 

DHCP enabled, but my DVR will

• Try using a different Ethernet cable and/or a different port on your router

 

 

not acquire an IP address

 

 

 

CV503-8CH-19M

79

 

 

Image 82
Contents Nowyoucansee Need HELP? Do not Return this Product to the StoreProduct Warranty Information Table of Contents Online Software Peripheral Cable IR Remote Control What is IncludedHard Drive Installed IntroductionFeatures Expandable up to 8 Total Cameras Included Mouse and Remote ControlPassword Protection Search by Date, Time or Event7External I/O Power on/off switchLAN Connection Connects to Router MenuAll Corresponding camera onFull screen Current menuBasic Setup Ensure that the cameras are strongly secured into the wallBasic Setup InstructionsPlug the included RCA cable into the BNC connector Connecting a PTZ CameraTo connect a two-wire PTZ camera Plug Mouse into USB portGetting Started Using the MouseGetting Started Screen ViewingFunction Menu Options Function MenuFunction Menu Main menuPTZ Camera PTZ setup menu PTZ CruiseShortcut Menu Controls for the PTZ camera are as followsStop Record PIP ModeStart Record Start CruiseTo zoom Digital ZoomMain Menu Main Menu Using the KeyboardCamera Setup NameColor PositionLive Time Display To Enable/Disable the Time DisplayTo Setup Privacy Zone Privacy ZoneChannel On/Off Record SetupAuto Sequence QualityTo turn audio recording On or Off To adjust and/or set a file sizeAudio Rec To program your LCD-DVR to always recordNavigate to and select Schedule To adjust the recording scheduleSchedule Menu To copy one day’s schedule to another or all other daysMain Menu To adjust the type of IP Mode you are usingType Media Port vs. Web Port Media PortWeb Port IP ADDDdns Setup To adjust the DNS addressTo setup your Ddns on the DVR DNSVideo Search To access and play back footageTo access and playback footage from a certain time Select the channel to view recorded footage fromFile List To access the file from the video search menuFile List Menu To Backup footage onto USB device BackupDevices Overwrite To Enable/Disable overwrite modeHDD Information this option includesTo Format the HDD HDD FormatUSB Format To Format the attached USB driveAlarm Triggers Alarm SetupTypes of Alarms To Set AlarmsPTZ Setup Mobile SetupTo change the status of motion detection for each camera Motion DetectionMotion Detection Menu MD Area To adjust the MD areaMotion Area Mask System Setup Menu System SetupMaintenance Set automatic maintenance, reboots and updates Date and TimeTo adjust the date format To adjust the dateTo adjust the time To adjust the time formatTime Setup with DST options To customize the LCD-DVR daylight savings time adjustmentDaylight Savings Time DST To Change the Password Password SetupTo Enable Password Protection To Change the Device IDTo adjust your video system Video SetupTo adjust the resolution for your monitor Video SetupLanguage Language Setup English onlyTo adjust the language System InformationSystem Maintenance Playback PlaybackPlayback Screen Computer Playback Software InstallationPlayback To view footage though your computerAn Entire Folder One VideoMultiple Folders Decrease Rate Backward FrameForward Frame Increase RateTime Video functions from the bottom bar are as followsDate 20. STSetting Menu for Advanced Users only To save a section of videoProcessor Amplification Control To adjust the video settingsWhen the settings are adjusted to your liking, select OK Help MenuNetwork Guide Connecting DVR to a RouterRequirements Finding your DVR’s IP Address Preparing Your Computer for Viewing the LCD-DVRMethod Network GuideIf this is an option Click apply Click OK Viewing Your DVR on Your ComputerLog in to the DVR Using Internet Explorer Installing the ActiveX controlsViewing Your DVR Outside of Your Network OptionOption 1 recommended Option Port forward HomeTesting Port Forwarding Open another web browserError / Page cannot be displayed If YOU Cannot ConnectFill out Ddns setup with Dyndns account information To Configure the DVR to Work with DdnsDdns Dynamic DNS Following instructions are for DYNDNS.org setup Next page has information about creating your host nameLOG Into the Account and Setup a Ddns Host To set up a DynDNS name for your DVRTo View DVR Through Host Name Default PasswordDefault Password123456 Logging Into SoftwareOnline Software PTZ Camera Controls Live ModeCruise Setup RecordPTZ Options To set up cruiseOnline Software Other Mouse OptionsTo search through footage To narrow down footage to search throughPlayback options from left to right are as follows Press select Select apply to save settings Record ModeRecord Mode To set your DVR for schedule recordRed Schedule adjustTo change the schedule To copy one day’s schedule to another dayAlarm Setup Network Setup Menu Information to select should be specified in the PTZ manualInternet Bandwidth SettingsTo change where the files are saved File Save PathTo customize the DVR’s daylight saving time adjustment Make sure password enable is set to onTo turn the DVR daylight saving time on Host Info LogoutPort Forwarding Set User name, password and port on DVRMobile Viewing From your computer or iPhoneFrom your BlackBerry From your computerInformation Play/Pause Snapshot PTZ Controls Full Screen View Windows Mobile setupInstall viewing software, from your computer From your phoneSymbian Mobile Phone will begin preparation to installFrom your mobile phone Troubleshooting ’clock PM Power sourceRecord function Function offConnect Port Forwarding may not be set up correctlySetting that will work in most networking situations Side of DVRSpecifications Mode Yes Pelco-D, Pelco-P10 sec Supports up to 8 lettersCamera Power Supply Ports What is IncludedFeatures PIN DIN Female Connection connects to male RCAWiring Instructions Drilling TemplateYes Color Sharp CCDTV Lines IP65888.771.1701 Support@SVAT.comAdditional Accessories DescriptionVisit US on the WEB