SVAT Electronics CV503-8CH instruction manual Playback options from left to right are as follows

Page 69

ONLINE SOFTWARE	SVAT ELECTRONICS
	nowyoucansee

Playing Back Footage:

When you prompt video to play, it may take a few minutes to load, then the footage will begin playing automatically. The bottom of the screen will have the playback options.

The playback options (from left to right) are as follows:

Pause/Play:	Pressing this pauses playback. If the video is currently
	paused, pressing this button again will prompt the video to
	begin playing.
Stop:	Pressing this will stop the footage from playing and a blank
	screen will appear. Pressing play after you have stopped the
	footage will play the selected footage from the beginning.
F.F:	Fast forward. Selecting this option fast forwards through
	the footage. The more times you select this, the faster the
	footage will fast forward (2x, 4x, 8x, 16x).
Slow:	Selecting this option slows the playback footage down. The
	more times you select this, the slower the footage will play
	(2x, 4x, 8x, 16x).
Next Frame:	Selecting this moves the footage forward a single frame.
264 to AVI:	Selecting this will convert previously backed up or recorded
	footage from a .264 file to an AVI file. This will make the
	footage playable on more video player devices.
	• When selecting this you will be asked to select the video
	you want converted as well as where you want the video
	converted to (source and destination file)
	• Once you have selected the video and save folder,
	select “convert”
	• It should take a few moments to convert the footage.
	Once the footage is converted an alert will appear and
	notify you that the conversion is complete
Volume:	If you have an audio supported camera connected, clicking
	and dragging this will turn the volume of the playback
	footage up and down.
Backup:	Pressing this will backup the selected video to your computer.
	The backed up footage will automatically save to the selected
	location on your computer.
Replay:	Selecting this will replay the last footage played.

CV503-8CH-19M	66

Image 69

Contents Nowyoucansee Do not Return this Product to the Store Need HELP?Product Warranty Information Table of Contents Online Software Hard Drive Installed What is IncludedPeripheral Cable IR Remote Control IntroductionFeatures Password Protection Included Mouse and Remote ControlExpandable up to 8 Total Cameras Search by Date, Time or Event7LAN Connection Connects to Router Power on/off switchExternal I/O MenuFull screen Corresponding camera onAll Current menuEnsure that the cameras are strongly secured into the wall Basic SetupInstructions Basic SetupTo connect a two-wire PTZ camera Connecting a PTZ CameraPlug the included RCA cable into the BNC connector Plug Mouse into USB portGetting Started Using the MouseGetting Started Screen ViewingFunction Menu Function MenuFunction Menu Options Main menuShortcut Menu PTZ setup menu PTZ CruisePTZ Camera Controls for the PTZ camera are as followsStart Record PIP ModeStop Record Start CruiseDigital Zoom To zoomMain Menu Camera Setup Using the KeyboardMain Menu NamePosition ColorLive To Setup Privacy Zone To Enable/Disable the Time DisplayTime Display Privacy ZoneAuto Sequence Record SetupChannel On/Off QualityAudio Rec To adjust and/or set a file sizeTo turn audio recording On or Off To program your LCD-DVR to always recordSchedule Menu To adjust the recording scheduleNavigate to and select Schedule To copy one day’s schedule to another or all other daysTo adjust the type of IP Mode you are using Main MenuType Web Port Media PortMedia Port vs. Web Port IP ADDTo setup your Ddns on the DVR To adjust the DNS addressDdns Setup DNSTo access and playback footage from a certain time To access and play back footageVideo Search Select the channel to view recorded footage fromTo access the file from the video search menu File ListFile List Menu Backup To Backup footage onto USB deviceDevices HDD To Enable/Disable overwrite modeOverwrite Information this option includesUSB Format HDD FormatTo Format the HDD To Format the attached USB driveTypes of Alarms Alarm SetupAlarm Triggers To Set AlarmsMobile Setup PTZ SetupMotion Detection To change the status of motion detection for each cameraMotion Detection Menu To adjust the MD area MD AreaMotion Area Mask Maintenance Set automatic maintenance, reboots and updates System SetupSystem Setup Menu Date and TimeTo adjust the time To adjust the dateTo adjust the date format To adjust the time formatTo customize the LCD-DVR daylight savings time adjustment Time Setup with DST optionsDaylight Savings Time DST To Enable Password Protection Password SetupTo Change the Password To Change the Device IDTo adjust the resolution for your monitor Video SetupTo adjust your video system Video SetupTo adjust the language Language Setup English onlyLanguage System InformationSystem Maintenance Playback PlaybackPlayback Screen Playback Software InstallationComputer Playback To view footage though your computerOne Video An Entire FolderMultiple Folders Forward Frame Backward FrameDecrease Rate Increase RateDate Video functions from the bottom bar are as followsTime 20. STTo save a section of video Setting Menu for Advanced Users onlyWhen the settings are adjusted to your liking, select OK To adjust the video settingsProcessor Amplification Control Help MenuConnecting DVR to a Router Network GuideRequirements Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP AddressNetwork Guide MethodIf this is an option Viewing Your DVR on Your Computer Click apply Click OKInstalling the ActiveX controls Log in to the DVR Using Internet ExplorerOption Viewing Your DVR Outside of Your NetworkOption 1 recommended Port forward Home OptionOpen another web browser Testing Port ForwardingIf YOU Cannot Connect Error / Page cannot be displayedTo Configure the DVR to Work with Ddns Fill out Ddns setup with Dyndns account informationDdns Dynamic DNS Next page has information about creating your host name Following instructions are for DYNDNS.org setupTo set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns HostDefault Password123456 Default PasswordTo View DVR Through Host Name Logging Into SoftwareOnline Software Cruise Setup Live ModePTZ Camera Controls RecordOnline Software To set up cruisePTZ Options Other Mouse OptionsTo narrow down footage to search through To search through footagePlayback options from left to right are as follows Record Mode Record ModePress select Select apply to save settings To set your DVR for schedule recordTo change the schedule Schedule adjustRed To copy one day’s schedule to another dayAlarm Setup Information to select should be specified in the PTZ manual Network Setup MenuTo change where the files are saved SettingsInternet Bandwidth File Save PathMake sure password enable is set to on To customize the DVR’s daylight saving time adjustmentTo turn the DVR daylight saving time on Logout Host InfoMobile Viewing Set User name, password and port on DVRPort Forwarding From your computer or iPhoneFrom your computer From your BlackBerryInformation Install viewing software, from your computer Windows Mobile setupPlay/Pause Snapshot PTZ Controls Full Screen View From your phonePhone will begin preparation to install Symbian MobileFrom your mobile phone Troubleshooting Record function Power source’clock PM Function offSetting that will work in most networking situations Port Forwarding may not be set up correctlyConnect Side of DVRSpecifications 10 sec Yes Pelco-D, Pelco-PMode Supports up to 8 lettersFeatures What is IncludedCamera Power Supply Ports PIN DIN Female Connection connects to male RCADrilling Template Wiring InstructionsTV Lines Color Sharp CCDYes IP65Support@SVAT.com 888.771.1701Description Additional AccessoriesVisit US on the WEB