SVAT Electronics CV503-8CH Shortcut Menu, PTZ Camera, Controls for the PTZ camera are as follows

Page 16

Pressing the + zooms in and pressing the – zooms out

Pressing the + focuses the picture and pressing the – takes the focus away. This is useful if an object is either close range or long range and is being displayed blurry

Pressing the + lets in more light and pressing the – takes light out of the picture. This is useful for varying lighting situations as well as correcting backlight issues

This function allows you to setup preset positions for the PTZ to follow, the PTZ camera will cruise through your set positions and times. Not all PTZ cameras have this function

Clicking on the directional arrows moves the camera in the direction of that arrow

This bar allows you to adjust the speed that the camera will move

SHORTCUT MENU	SVAT ELECTRONICS
	nowyoucansee

PTZ Camera

Selecting this shortcut opens the PTZ menu (PTZ camera not included). PTZ stands for Pan/Tilt/Zoom. This menu option will only control PTZ cameras properly configured in Device Management. To view instructions on how to configure a PTZ camera, please see Connecting a PTZ Camera on page 10.

The controls for the PTZ camera are as follows:

Slow/Fast:

Zoom:

Focus:

Iris:

Cruise Setup:

Directional keys:

To set up cruise:

1.Right click the mouse and open PTZ.

2.Select “Cruise Set”.

3.Select the channel that the PTZ camera is connected to. (The PTZ camera must already be configured).

4.Use the directional buttons to adjust the camera to the places you would like the PTZ camera to view in cruise mode. Press the SET button at each desired position.

5.Click on stop time and set the time (in seconds) for how long you would like the PTZ camera to stay at each position.

6.To review your set points, select the current point you would like to view and click on “go to”.

7.Click “save” and then “exit”.

8.To erase all preset cruise points click on “clean.”

9.To start the PTZ cruise, open the shortcut menu and select “start cruise”. To stop the PTZ cruise, open the shortcut menu and select “stop cruise”.

PTZ setup menu

PTZ Cruise

CV503-8CH-19M	13

Image 16

Contents Nowyoucansee Need HELP? Do not Return this Product to the StoreProduct Warranty Information Table of Contents Online Software What is Included Hard Drive InstalledPeripheral Cable IR Remote Control IntroductionFeatures Included Mouse and Remote Control Password ProtectionExpandable up to 8 Total Cameras Search by Date, Time or Event7Power on/off switch LAN Connection Connects to RouterExternal I/O MenuCorresponding camera on Full screenAll Current menuBasic Setup Ensure that the cameras are strongly secured into the wallBasic Setup InstructionsConnecting a PTZ Camera To connect a two-wire PTZ cameraPlug the included RCA cable into the BNC connector Plug Mouse into USB portUsing the Mouse Getting StartedGetting Started Screen ViewingFunction Menu Function MenuFunction Menu Options Main menuPTZ setup menu PTZ Cruise Shortcut MenuPTZ Camera Controls for the PTZ camera are as followsPIP Mode Start RecordStop Record Start CruiseTo zoom Digital ZoomMain Menu Using the Keyboard Camera SetupMain Menu NameColor PositionLive To Enable/Disable the Time Display To Setup Privacy ZoneTime Display Privacy ZoneRecord Setup Auto SequenceChannel On/Off QualityTo adjust and/or set a file size Audio RecTo turn audio recording On or Off To program your LCD-DVR to always recordTo adjust the recording schedule Schedule MenuNavigate to and select Schedule To copy one day’s schedule to another or all other daysMain Menu To adjust the type of IP Mode you are usingType Media Port Web PortMedia Port vs. Web Port IP ADDTo adjust the DNS address To setup your Ddns on the DVRDdns Setup DNSTo access and play back footage To access and playback footage from a certain timeVideo Search Select the channel to view recorded footage fromFile List To access the file from the video search menuFile List Menu To Backup footage onto USB device BackupDevices To Enable/Disable overwrite mode HDDOverwrite Information this option includesHDD Format USB FormatTo Format the HDD To Format the attached USB driveAlarm Setup Types of AlarmsAlarm Triggers To Set AlarmsPTZ Setup Mobile SetupTo change the status of motion detection for each camera Motion DetectionMotion Detection Menu MD Area To adjust the MD areaMotion Area Mask System Setup Maintenance Set automatic maintenance, reboots and updatesSystem Setup Menu Date and TimeTo adjust the date To adjust the timeTo adjust the date format To adjust the time formatTime Setup with DST options To customize the LCD-DVR daylight savings time adjustmentDaylight Savings Time DST Password Setup To Enable Password ProtectionTo Change the Password To Change the Device IDVideo Setup To adjust the resolution for your monitorTo adjust your video system Video SetupLanguage Setup English only To adjust the languageLanguage System InformationSystem Maintenance Playback PlaybackPlayback Screen Software Installation PlaybackComputer Playback To view footage though your computerAn Entire Folder One VideoMultiple Folders Backward Frame Forward FrameDecrease Rate Increase RateVideo functions from the bottom bar are as follows DateTime 20. STSetting Menu for Advanced Users only To save a section of videoTo adjust the video settings When the settings are adjusted to your liking, select OKProcessor Amplification Control Help MenuNetwork Guide Connecting DVR to a RouterRequirements Finding your DVR’s IP Address Preparing Your Computer for Viewing the LCD-DVRMethod Network GuideIf this is an option Click apply Click OK Viewing Your DVR on Your ComputerLog in to the DVR Using Internet Explorer Installing the ActiveX controlsViewing Your DVR Outside of Your Network OptionOption 1 recommended Option Port forward HomeTesting Port Forwarding Open another web browserError / Page cannot be displayed If YOU Cannot ConnectFill out Ddns setup with Dyndns account information To Configure the DVR to Work with DdnsDdns Dynamic DNS Following instructions are for DYNDNS.org setup Next page has information about creating your host nameLOG Into the Account and Setup a Ddns Host To set up a DynDNS name for your DVRDefault Password Default Password123456To View DVR Through Host Name Logging Into SoftwareOnline Software Live Mode Cruise SetupPTZ Camera Controls RecordTo set up cruise Online SoftwarePTZ Options Other Mouse OptionsTo search through footage To narrow down footage to search throughPlayback options from left to right are as follows Record Mode Record ModePress select Select apply to save settings To set your DVR for schedule recordSchedule adjust To change the scheduleRed To copy one day’s schedule to another dayAlarm Setup Network Setup Menu Information to select should be specified in the PTZ manualSettings To change where the files are savedInternet Bandwidth File Save PathTo customize the DVR’s daylight saving time adjustment Make sure password enable is set to onTo turn the DVR daylight saving time on Host Info LogoutSet User name, password and port on DVR Mobile ViewingPort Forwarding From your computer or iPhoneFrom your BlackBerry From your computerInformation Windows Mobile setup Install viewing software, from your computerPlay/Pause Snapshot PTZ Controls Full Screen View From your phoneSymbian Mobile Phone will begin preparation to installFrom your mobile phone Troubleshooting Power source Record function’clock PM Function offPort Forwarding may not be set up correctly Setting that will work in most networking situationsConnect Side of DVRSpecifications Yes Pelco-D, Pelco-P 10 secMode Supports up to 8 lettersWhat is Included FeaturesCamera Power Supply Ports PIN DIN Female Connection connects to male RCAWiring Instructions Drilling TemplateColor Sharp CCD TV LinesYes IP65888.771.1701 Support@SVAT.comAdditional Accessories DescriptionVisit US on the WEB