SVAT Electronics CV503-8CH Live Mode, PTZ Camera Controls, Cruise Setup, Record, Capture

Page 66

ONLINE SOFTWARE

SVAT ELECTRONICS

 

nowyoucansee

Live Mode

The fist tab along the top of the screen for the online viewing allows you to view the DVR in live mode. From this mode the buttons along the side and their functions are as follows:

1.PTZ Camera Controls:

Selecting this function opens up PTZ control menu. For more information see “PTZ options” on Pg 67

2.Cruise Setup:

This function allows you to setup directions for the PTZ to follow, the PTZ camera will cruise through your set positions and times. Not all PTZ cameras have this function. For more information see “PTZ options” on Pg 67

3.Record:

Pressing this button prompts the DVR to record footage directly onto your computer. To stop the recording, press the record button again. The recorded footage will automatically save to the selected location on your computer.

4.Capture:

Pressing this button prompts the DVR to take a snapshot of the screen and automatically save the picture to the selected location on your computer.

5.Close/Open Window: Selecting this icon closes all the windows in live mode revealing a blank screen. Click this icon again to open all windows back up

6.Single Screen View: Selecting this will open up a full screen view of the screen you have highlighted

7.Quad Screen View: Selecting this will open a quad screen view of all 4 cameras.

8.8 Screen View: The software is adaptable for other DVRs, selecting this would show 9 screens for an 8 channel DVR

9.16 Channel View: The software is adaptable for other DVRs, selecting this would show 16 screens for a 16 channel DVR

10.Volume Control: This controls the volume if an audio supported camera or microphone is connected (not included). Pointing and dragging the mouse across the volume bars turns the volume up and down. To mute the sound, click the speaker icon next to the volume bars

CV503-8CH-19M

63

 

 

Image 66
Contents Nowyoucansee Need HELP? Do not Return this Product to the StoreProduct Warranty Information Table of Contents Online Software Peripheral Cable IR Remote Control What is IncludedHard Drive Installed IntroductionFeatures Expandable up to 8 Total Cameras Included Mouse and Remote ControlPassword Protection Search by Date, Time or Event7External I/O Power on/off switchLAN Connection Connects to Router MenuAll Corresponding camera onFull screen Current menuBasic Setup Ensure that the cameras are strongly secured into the wallBasic Setup InstructionsPlug the included RCA cable into the BNC connector Connecting a PTZ CameraTo connect a two-wire PTZ camera Plug Mouse into USB portGetting Started Using the MouseGetting Started Screen ViewingFunction Menu Options Function MenuFunction Menu Main menuPTZ Camera PTZ setup menu PTZ CruiseShortcut Menu Controls for the PTZ camera are as followsStop Record PIP ModeStart Record Start CruiseDigital Zoom To zoomMain Menu Main Menu Using the KeyboardCamera Setup NamePosition ColorLive Time Display To Enable/Disable the Time DisplayTo Setup Privacy Zone Privacy ZoneChannel On/Off Record SetupAuto Sequence QualityTo turn audio recording On or Off To adjust and/or set a file sizeAudio Rec To program your LCD-DVR to always recordNavigate to and select Schedule To adjust the recording scheduleSchedule Menu To copy one day’s schedule to another or all other daysTo adjust the type of IP Mode you are using Main MenuType Media Port vs. Web Port Media PortWeb Port IP ADDDdns Setup To adjust the DNS addressTo setup your Ddns on the DVR DNSVideo Search To access and play back footageTo access and playback footage from a certain time Select the channel to view recorded footage fromTo access the file from the video search menu File ListFile List Menu Backup To Backup footage onto USB deviceDevices Overwrite To Enable/Disable overwrite modeHDD Information this option includesTo Format the HDD HDD FormatUSB Format To Format the attached USB driveAlarm Triggers Alarm SetupTypes of Alarms To Set AlarmsPTZ Setup Mobile SetupMotion Detection To change the status of motion detection for each cameraMotion Detection Menu To adjust the MD area MD AreaMotion Area Mask System Setup Menu System SetupMaintenance Set automatic maintenance, reboots and updates Date and TimeTo adjust the date format To adjust the dateTo adjust the time To adjust the time formatTo customize the LCD-DVR daylight savings time adjustment Time Setup with DST optionsDaylight Savings Time DST To Change the Password Password SetupTo Enable Password Protection To Change the Device IDTo adjust your video system Video SetupTo adjust the resolution for your monitor Video SetupLanguage Language Setup English onlyTo adjust the language System InformationSystem Maintenance Playback PlaybackPlayback Screen Computer Playback Software InstallationPlayback To view footage though your computerOne Video An Entire FolderMultiple Folders Decrease Rate Backward FrameForward Frame Increase RateTime Video functions from the bottom bar are as followsDate 20. STSetting Menu for Advanced Users only To save a section of videoProcessor Amplification Control To adjust the video settingsWhen the settings are adjusted to your liking, select OK Help MenuConnecting DVR to a Router Network GuideRequirements Finding your DVR’s IP Address Preparing Your Computer for Viewing the LCD-DVRNetwork Guide MethodIf this is an option Click apply Click OK Viewing Your DVR on Your ComputerLog in to the DVR Using Internet Explorer Installing the ActiveX controlsViewing Your DVR Outside of Your Network OptionOption 1 recommended Option Port forward HomeTesting Port Forwarding Open another web browserError / Page cannot be displayed If YOU Cannot ConnectTo Configure the DVR to Work with Ddns Fill out Ddns setup with Dyndns account informationDdns Dynamic DNS Following instructions are for DYNDNS.org setup Next page has information about creating your host nameLOG Into the Account and Setup a Ddns Host To set up a DynDNS name for your DVRTo View DVR Through Host Name Default PasswordDefault Password123456 Logging Into SoftwareOnline Software PTZ Camera Controls Live ModeCruise Setup RecordPTZ Options To set up cruiseOnline Software Other Mouse OptionsTo search through footage To narrow down footage to search throughPlayback options from left to right are as follows Press select Select apply to save settings Record ModeRecord Mode To set your DVR for schedule recordRed Schedule adjustTo change the schedule To copy one day’s schedule to another dayAlarm Setup Network Setup Menu Information to select should be specified in the PTZ manualInternet Bandwidth SettingsTo change where the files are saved File Save PathMake sure password enable is set to on To customize the DVR’s daylight saving time adjustmentTo turn the DVR daylight saving time on Host Info LogoutPort Forwarding Set User name, password and port on DVRMobile Viewing From your computer or iPhoneFrom your computer From your BlackBerryInformation Play/Pause Snapshot PTZ Controls Full Screen View Windows Mobile setupInstall viewing software, from your computer From your phonePhone will begin preparation to install Symbian MobileFrom your mobile phone Troubleshooting ’clock PM Power sourceRecord function Function offConnect Port Forwarding may not be set up correctlySetting that will work in most networking situations Side of DVRSpecifications Mode Yes Pelco-D, Pelco-P10 sec Supports up to 8 lettersCamera Power Supply Ports What is IncludedFeatures PIN DIN Female Connection connects to male RCAWiring Instructions Drilling TemplateYes Color Sharp CCDTV Lines IP65888.771.1701 Support@SVAT.comAdditional Accessories DescriptionVisit US on the WEB