SVAT Electronics CV503-8CH Main Menu, Type, To adjust the type of IP Mode you are using

Page 25

	MAIN MENU	SVAT ELECTRONICS
		nowyoucansee
	NETWORK SETUP MENU
	The network setup menu is your gateway to viewing your	Network Menu
	footage online. This menu holds the information you need	Network Menu
	footage online. This menu holds the information you need
	to set up on-line viewing. The DVR is pre-configured to work
	with most basic network setups and the values shown on
	the screen are the values you will be using to setup and view
	the DVR on a computer.
	The network setup menu allows you to configure all
	the settings necessary to view your DVR online. You can
	configure the way the DVR acquires an IP address, adjust
	which ports are used to communicate with the DVR, adjust
	your DNS as well as set your information for a DDNS account.

Type:

Determines how the LCD-DVR will acquire and IP address: DHCP, Static IP or PPoE.

DHCP:

Dynamic Host Configuration Protocol (DHCP) is the most common setup for home or office networks. This allows the LCD-DVR to automatically acquire an IP address from the router. By default, the IP mode will mode will be set to DHCP.

Static IP:

Static IP addresses are manually assigned by the administrator. A static IP address would be beneficial if your internal IP changes frequently.

PPPoE:

Used for DSL services where individuals connect to a DSL modem. It is recommended to store PPPOE information in the router. If the information is not stored in the router, the DSL model will need to be configured. Contact your Internet Service Provider for details on modem configuration.

To adjust the type of IP Mode you are using:

1.Select the drop down menu beside the word TYPE.

2.Highlight the IP Mode you would like to use and press select.

3.Select “apply” to save your changes.

CV503-8CH-19M	22

Image 25

Contents Nowyoucansee Do not Return this Product to the Store Need HELP?Product Warranty Information Table of Contents Online Software Hard Drive Installed What is IncludedPeripheral Cable IR Remote Control IntroductionFeatures Password Protection Included Mouse and Remote ControlExpandable up to 8 Total Cameras Search by Date, Time or Event7LAN Connection Connects to Router Power on/off switchExternal I/O MenuFull screen Corresponding camera onAll Current menuEnsure that the cameras are strongly secured into the wall Basic SetupInstructions Basic SetupTo connect a two-wire PTZ camera Connecting a PTZ CameraPlug the included RCA cable into the BNC connector Plug Mouse into USB portGetting Started Using the MouseGetting Started Screen ViewingFunction Menu Function MenuFunction Menu Options Main menuShortcut Menu PTZ setup menu PTZ CruisePTZ Camera Controls for the PTZ camera are as followsStart Record PIP ModeStop Record Start CruiseTo zoom Digital ZoomMain Menu Camera Setup Using the KeyboardMain Menu NameColor PositionLive To Setup Privacy Zone To Enable/Disable the Time DisplayTime Display Privacy ZoneAuto Sequence Record SetupChannel On/Off QualityAudio Rec To adjust and/or set a file sizeTo turn audio recording On or Off To program your LCD-DVR to always recordSchedule Menu To adjust the recording scheduleNavigate to and select Schedule To copy one day’s schedule to another or all other daysMain Menu To adjust the type of IP Mode you are usingType Web Port Media PortMedia Port vs. Web Port IP ADDTo setup your Ddns on the DVR To adjust the DNS addressDdns Setup DNSTo access and playback footage from a certain time To access and play back footageVideo Search Select the channel to view recorded footage fromFile List To access the file from the video search menuFile List Menu To Backup footage onto USB device BackupDevices HDD To Enable/Disable overwrite modeOverwrite Information this option includesUSB Format HDD FormatTo Format the HDD To Format the attached USB driveTypes of Alarms Alarm SetupAlarm Triggers To Set AlarmsMobile Setup PTZ SetupTo change the status of motion detection for each camera Motion DetectionMotion Detection Menu MD Area To adjust the MD areaMotion Area Mask Maintenance Set automatic maintenance, reboots and updates System SetupSystem Setup Menu Date and TimeTo adjust the time To adjust the dateTo adjust the date format To adjust the time formatTime Setup with DST options To customize the LCD-DVR daylight savings time adjustmentDaylight Savings Time DST To Enable Password Protection Password SetupTo Change the Password To Change the Device IDTo adjust the resolution for your monitor Video SetupTo adjust your video system Video SetupTo adjust the language Language Setup English onlyLanguage System InformationSystem Maintenance Playback PlaybackPlayback Screen Playback Software InstallationComputer Playback To view footage though your computerAn Entire Folder One VideoMultiple Folders Forward Frame Backward FrameDecrease Rate Increase RateDate Video functions from the bottom bar are as followsTime 20. STTo save a section of video Setting Menu for Advanced Users onlyWhen the settings are adjusted to your liking, select OK To adjust the video settingsProcessor Amplification Control Help MenuNetwork Guide Connecting DVR to a RouterRequirements Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP AddressMethod Network GuideIf this is an option Viewing Your DVR on Your Computer Click apply Click OKInstalling the ActiveX controls Log in to the DVR Using Internet ExplorerOption Viewing Your DVR Outside of Your NetworkOption 1 recommended Port forward Home OptionOpen another web browser Testing Port ForwardingIf YOU Cannot Connect Error / Page cannot be displayedFill out Ddns setup with Dyndns account information To Configure the DVR to Work with DdnsDdns Dynamic DNS Next page has information about creating your host name Following instructions are for DYNDNS.org setupTo set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns HostDefault Password123456 Default PasswordTo View DVR Through Host Name Logging Into SoftwareOnline Software Cruise Setup Live ModePTZ Camera Controls RecordOnline Software To set up cruisePTZ Options Other Mouse OptionsTo narrow down footage to search through To search through footagePlayback options from left to right are as follows Record Mode Record ModePress select Select apply to save settings To set your DVR for schedule recordTo change the schedule Schedule adjustRed To copy one day’s schedule to another dayAlarm Setup Information to select should be specified in the PTZ manual Network Setup MenuTo change where the files are saved SettingsInternet Bandwidth File Save PathTo customize the DVR’s daylight saving time adjustment Make sure password enable is set to onTo turn the DVR daylight saving time on Logout Host InfoMobile Viewing Set User name, password and port on DVRPort Forwarding From your computer or iPhoneFrom your BlackBerry From your computerInformation Install viewing software, from your computer Windows Mobile setupPlay/Pause Snapshot PTZ Controls Full Screen View From your phoneSymbian Mobile Phone will begin preparation to installFrom your mobile phone Troubleshooting Record function Power source’clock PM Function offSetting that will work in most networking situations Port Forwarding may not be set up correctlyConnect Side of DVRSpecifications 10 sec Yes Pelco-D, Pelco-PMode Supports up to 8 lettersFeatures What is IncludedCamera Power Supply Ports PIN DIN Female Connection connects to male RCADrilling Template Wiring InstructionsTV Lines Color Sharp CCDYes IP65Support@SVAT.com 888.771.1701Description Additional AccessoriesVisit US on the WEB