SVAT Electronics CV503-8CH Online Software, PTZ Options, Other Mouse Options, To set up cruise

Page 67
Pressing the + focuses the picture and pressing the – takes the focus away, many PTZ cameras do this automatically
Pressing the + lets in more light and pressing the – takes light out of the picture, many PTZ cameras do this automatically
Clicking on the directional arrows moves the camera around
Pressing the + zooms in and pressing the – zooms out

ONLINE SOFTWARE

PTZ OPTIONS

The controls for the PTZ camera are as follows:

Zoom:

Focus:

Iris:

Directional Keys:

To set up cruise:

1.Using Set, or manually typing the number in, select the channel that the PTZ camera is hooked up to in the type box.

2.Move the camera to the places you would like the PTZ camera to cruise to and click the load button at each desired position.

3.If you select the “cls” button, the set positions will be cleared.

4.Click save once you have set all positions you would like to cruise to.

5.To start the PTZ cruise select “cruise”, to stop the PTZ cruise select “cruise” again.

SVAT ELECTRONICS

nowyoucansee

OTHER MOUSE OPTIONS

When you right click the mouse a separate menu appears and allows you to preform the following functions:

Open or close individual windows:

Click on the screen you would like to open/close. It should have a red box around it then right click your mouse and select open/ close window

• You can also open/close all screens:

Right click and select from menu

Start recording:

Right click and select from menu

Stop recording:

Right click and select from menu

CV503-8CH-19M

64

 

 

Image 67
Contents Nowyoucansee Do not Return this Product to the Store Need HELP?Product Warranty Information Table of Contents Online Software Introduction What is IncludedHard Drive Installed Peripheral Cable IR Remote ControlFeatures Search by Date, Time or Event7 Included Mouse and Remote ControlPassword Protection Expandable up to 8 Total CamerasMenu Power on/off switchLAN Connection Connects to Router External I/OCurrent menu Corresponding camera onFull screen AllEnsure that the cameras are strongly secured into the wall Basic SetupInstructions Basic SetupPlug Mouse into USB port Connecting a PTZ CameraTo connect a two-wire PTZ camera Plug the included RCA cable into the BNC connectorScreen Viewing Using the MouseGetting Started Getting StartedMain menu Function MenuFunction Menu Function Menu OptionsControls for the PTZ camera are as follows PTZ setup menu PTZ CruiseShortcut Menu PTZ CameraStart Cruise PIP ModeStart Record Stop RecordTo zoom Digital ZoomMain Menu Name Using the KeyboardCamera Setup Main MenuColor PositionLive Privacy Zone To Enable/Disable the Time DisplayTo Setup Privacy Zone Time DisplayQuality Record SetupAuto Sequence Channel On/OffTo program your LCD-DVR to always record To adjust and/or set a file sizeAudio Rec To turn audio recording On or OffTo copy one day’s schedule to another or all other days To adjust the recording scheduleSchedule Menu Navigate to and select ScheduleMain Menu To adjust the type of IP Mode you are usingType IP ADD Media PortWeb Port Media Port vs. Web PortDNS To adjust the DNS addressTo setup your Ddns on the DVR Ddns SetupSelect the channel to view recorded footage from To access and play back footageTo access and playback footage from a certain time Video SearchFile List To access the file from the video search menuFile List Menu To Backup footage onto USB device BackupDevices Information this option includes To Enable/Disable overwrite modeHDD OverwriteTo Format the attached USB drive HDD FormatUSB Format To Format the HDDTo Set Alarms Alarm SetupTypes of Alarms Alarm TriggersMobile Setup PTZ SetupTo change the status of motion detection for each camera Motion DetectionMotion Detection Menu MD Area To adjust the MD areaMotion Area Mask Date and Time System SetupMaintenance Set automatic maintenance, reboots and updates System Setup MenuTo adjust the time format To adjust the dateTo adjust the time To adjust the date formatTime Setup with DST options To customize the LCD-DVR daylight savings time adjustmentDaylight Savings Time DST To Change the Device ID Password SetupTo Enable Password Protection To Change the PasswordVideo Setup Video SetupTo adjust the resolution for your monitor To adjust your video systemSystem Information Language Setup English onlyTo adjust the language LanguageSystem Maintenance Playback PlaybackPlayback Screen To view footage though your computer Software InstallationPlayback Computer PlaybackAn Entire Folder One VideoMultiple Folders Increase Rate Backward FrameForward Frame Decrease Rate20. ST Video functions from the bottom bar are as followsDate TimeTo save a section of video Setting Menu for Advanced Users onlyHelp Menu To adjust the video settingsWhen the settings are adjusted to your liking, select OK Processor Amplification ControlNetwork Guide Connecting DVR to a RouterRequirements Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP AddressMethod Network GuideIf this is an option Viewing Your DVR on Your Computer Click apply Click OKInstalling the ActiveX controls Log in to the DVR Using Internet ExplorerOption Viewing Your DVR Outside of Your NetworkOption 1 recommended Port forward Home OptionOpen another web browser Testing Port ForwardingIf YOU Cannot Connect Error / Page cannot be displayedFill out Ddns setup with Dyndns account information To Configure the DVR to Work with DdnsDdns Dynamic DNS Next page has information about creating your host name Following instructions are for DYNDNS.org setupTo set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns HostLogging Into Software Default PasswordDefault Password123456 To View DVR Through Host NameOnline Software Record Live ModeCruise Setup PTZ Camera ControlsOther Mouse Options To set up cruiseOnline Software PTZ OptionsTo narrow down footage to search through To search through footagePlayback options from left to right are as follows To set your DVR for schedule record Record ModeRecord Mode Press select Select apply to save settingsTo copy one day’s schedule to another day Schedule adjustTo change the schedule RedAlarm Setup Information to select should be specified in the PTZ manual Network Setup MenuFile Save Path SettingsTo change where the files are saved Internet BandwidthTo customize the DVR’s daylight saving time adjustment Make sure password enable is set to onTo turn the DVR daylight saving time on Logout Host InfoFrom your computer or iPhone Set User name, password and port on DVRMobile Viewing Port ForwardingFrom your BlackBerry From your computerInformation From your phone Windows Mobile setupInstall viewing software, from your computer Play/Pause Snapshot PTZ Controls Full Screen ViewSymbian Mobile Phone will begin preparation to installFrom your mobile phone Troubleshooting Function off Power sourceRecord function ’clock PMSide of DVR Port Forwarding may not be set up correctlySetting that will work in most networking situations ConnectSpecifications Supports up to 8 letters Yes Pelco-D, Pelco-P10 sec ModePIN DIN Female Connection connects to male RCA What is IncludedFeatures Camera Power Supply PortsDrilling Template Wiring InstructionsIP65 Color Sharp CCDTV Lines YesSupport@SVAT.com 888.771.1701Description Additional AccessoriesVisit US on the WEB