SVAT Electronics CV503-8CH Network Guide, Requirements, Connecting DVR to a Router

Page 51

NETWORK GUIDE	SVAT ELECTRONICS
	nowyoucansee

REQUIREMENTS

You will need to have:

⁪The DVR connected to a router

⁪The router connected to the Internet

⁪A PC or laptop that is connected to the same router as the DVR. The PC can be connected by a wired or wireless connection

⁪Internet Explorer 6.0 or higher (to check your version of Internet Explorer open I.E. In the top Menu bar select “Help” and then select “About Internet Explorer”. The version of I.E. will be displayed.)

⁪A genuine and fully updated version of Windows XP, Vista or newer

Note: The computer and DVR need to be connected to the same router for initial setup. A computer will not always be necessary at the location to view the DVR.

CONNECTING DVR TO A ROUTER

1.Power off the DVR by removing the power cable from the left side of the LCD-DVR or flip the power switch.

2.Connect the included network cable to the left of the DVR in the Ethernet port (LAN).

3.Connect the other end of the network cable to an available port on the router.

4.Power on the DVR by reconnecting the power cable to the back of the DVR or by switching the power on.

CV503-8CH-19M	48

Image 51

Contents Nowyoucansee Do not Return this Product to the Store Need HELP?Product Warranty Information Table of Contents Online Software Introduction What is IncludedHard Drive Installed Peripheral Cable IR Remote ControlFeatures Search by Date, Time or Event7 Included Mouse and Remote ControlPassword Protection Expandable up to 8 Total CamerasMenu Power on/off switchLAN Connection Connects to Router External I/OCurrent menu Corresponding camera onFull screen AllEnsure that the cameras are strongly secured into the wall Basic SetupInstructions Basic SetupPlug Mouse into USB port Connecting a PTZ CameraTo connect a two-wire PTZ camera Plug the included RCA cable into the BNC connectorScreen Viewing Using the MouseGetting Started Getting StartedMain menu Function MenuFunction Menu Function Menu OptionsControls for the PTZ camera are as follows PTZ setup menu PTZ CruiseShortcut Menu PTZ CameraStart Cruise PIP ModeStart Record Stop RecordDigital Zoom To zoomMain Menu Name Using the KeyboardCamera Setup Main MenuPosition ColorLive Privacy Zone To Enable/Disable the Time DisplayTo Setup Privacy Zone Time DisplayQuality Record SetupAuto Sequence Channel On/OffTo program your LCD-DVR to always record To adjust and/or set a file sizeAudio Rec To turn audio recording On or OffTo copy one day’s schedule to another or all other days To adjust the recording scheduleSchedule Menu Navigate to and select ScheduleTo adjust the type of IP Mode you are using Main MenuType IP ADD Media PortWeb Port Media Port vs. Web PortDNS To adjust the DNS addressTo setup your Ddns on the DVR Ddns SetupSelect the channel to view recorded footage from To access and play back footageTo access and playback footage from a certain time Video SearchTo access the file from the video search menu File ListFile List Menu Backup To Backup footage onto USB deviceDevices Information this option includes To Enable/Disable overwrite modeHDD OverwriteTo Format the attached USB drive HDD FormatUSB Format To Format the HDDTo Set Alarms Alarm SetupTypes of Alarms Alarm TriggersMobile Setup PTZ SetupMotion Detection To change the status of motion detection for each cameraMotion Detection Menu To adjust the MD area MD AreaMotion Area Mask Date and Time System SetupMaintenance Set automatic maintenance, reboots and updates System Setup MenuTo adjust the time format To adjust the dateTo adjust the time To adjust the date formatTo customize the LCD-DVR daylight savings time adjustment Time Setup with DST optionsDaylight Savings Time DST To Change the Device ID Password SetupTo Enable Password Protection To Change the PasswordVideo Setup Video SetupTo adjust the resolution for your monitor To adjust your video systemSystem Information Language Setup English onlyTo adjust the language LanguageSystem Maintenance Playback PlaybackPlayback Screen To view footage though your computer Software InstallationPlayback Computer PlaybackOne Video An Entire FolderMultiple Folders Increase Rate Backward FrameForward Frame Decrease Rate20. ST Video functions from the bottom bar are as followsDate TimeTo save a section of video Setting Menu for Advanced Users onlyHelp Menu To adjust the video settingsWhen the settings are adjusted to your liking, select OK Processor Amplification ControlConnecting DVR to a Router Network GuideRequirements Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP AddressNetwork Guide MethodIf this is an option Viewing Your DVR on Your Computer Click apply Click OKInstalling the ActiveX controls Log in to the DVR Using Internet ExplorerOption Viewing Your DVR Outside of Your NetworkOption 1 recommended Port forward Home OptionOpen another web browser Testing Port ForwardingIf YOU Cannot Connect Error / Page cannot be displayedTo Configure the DVR to Work with Ddns Fill out Ddns setup with Dyndns account informationDdns Dynamic DNS Next page has information about creating your host name Following instructions are for DYNDNS.org setupTo set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns HostLogging Into Software Default PasswordDefault Password123456 To View DVR Through Host NameOnline Software Record Live ModeCruise Setup PTZ Camera ControlsOther Mouse Options To set up cruiseOnline Software PTZ OptionsTo narrow down footage to search through To search through footagePlayback options from left to right are as follows To set your DVR for schedule record Record ModeRecord Mode Press select Select apply to save settingsTo copy one day’s schedule to another day Schedule adjustTo change the schedule RedAlarm Setup Information to select should be specified in the PTZ manual Network Setup MenuFile Save Path SettingsTo change where the files are saved Internet BandwidthMake sure password enable is set to on To customize the DVR’s daylight saving time adjustmentTo turn the DVR daylight saving time on Logout Host InfoFrom your computer or iPhone Set User name, password and port on DVRMobile Viewing Port ForwardingFrom your computer From your BlackBerryInformation From your phone Windows Mobile setupInstall viewing software, from your computer Play/Pause Snapshot PTZ Controls Full Screen ViewPhone will begin preparation to install Symbian MobileFrom your mobile phone Troubleshooting Function off Power sourceRecord function ’clock PMSide of DVR Port Forwarding may not be set up correctlySetting that will work in most networking situations ConnectSpecifications Supports up to 8 letters Yes Pelco-D, Pelco-P10 sec ModePIN DIN Female Connection connects to male RCA What is IncludedFeatures Camera Power Supply PortsDrilling Template Wiring InstructionsIP65 Color Sharp CCDTV Lines YesSupport@SVAT.com 888.771.1701Description Additional AccessoriesVisit US on the WEB