SVAT Electronics CV503-8CH instruction manual Motion Detection Menu

Page 35

MAIN MENU	SVAT ELECTRONICS
	nowyoucansee

Motion Detection

This menu option allows you to adjust the motion detection settings for each individual camera. The settings you can adjust include turning motion detection on or off, adjusting the sensitivity of motion detection and designating the motion detection area.

To change the status of motion detection for each camera:

1.Navigate to and select the “STATUS” drop down list for the camera you would like to turn motion detection on/off.

2.Select “ON” or “OFF” to turn the motion detection on or off.

3.Repeat for all desired cameras.

4.Select “APPLY” to save the changes.

To change the sensitivity of motion detection for each camera:

1.Select the “SENSITIVITY” drop down list for the camera you would like to adjust the motion detection sensitivity for.

2.Select 1 to 4 from the drop down list to adjust the sensitivity. 1 is the lowest sensitivity and 4 is the highest.

3.Repeat for all desired cameras.

4.Select “APPLY” to save the changes.

Motion Detection Menu

CV503-8CH-19M	32

Image 35

Contents Nowyoucansee Do not Return this Product to the Store Need HELP?Product Warranty Information Table of Contents Online Software Introduction What is IncludedHard Drive Installed Peripheral Cable IR Remote ControlFeatures Search by Date, Time or Event7 Included Mouse and Remote ControlPassword Protection Expandable up to 8 Total CamerasMenu Power on/off switchLAN Connection Connects to Router External I/OCurrent menu Corresponding camera onFull screen AllEnsure that the cameras are strongly secured into the wall Basic SetupInstructions Basic SetupPlug Mouse into USB port Connecting a PTZ CameraTo connect a two-wire PTZ camera Plug the included RCA cable into the BNC connectorScreen Viewing Using the MouseGetting Started Getting StartedMain menu Function MenuFunction Menu Function Menu OptionsControls for the PTZ camera are as follows PTZ setup menu PTZ CruiseShortcut Menu PTZ CameraStart Cruise PIP ModeStart Record Stop RecordMain Menu Digital ZoomTo zoom Name Using the KeyboardCamera Setup Main MenuLive PositionColor Privacy Zone To Enable/Disable the Time DisplayTo Setup Privacy Zone Time DisplayQuality Record SetupAuto Sequence Channel On/OffTo program your LCD-DVR to always record To adjust and/or set a file sizeAudio Rec To turn audio recording On or OffTo copy one day’s schedule to another or all other days To adjust the recording scheduleSchedule Menu Navigate to and select ScheduleType To adjust the type of IP Mode you are usingMain Menu IP ADD Media PortWeb Port Media Port vs. Web PortDNS To adjust the DNS addressTo setup your Ddns on the DVR Ddns SetupSelect the channel to view recorded footage from To access and play back footageTo access and playback footage from a certain time Video SearchFile List Menu To access the file from the video search menuFile List Devices BackupTo Backup footage onto USB device Information this option includes To Enable/Disable overwrite modeHDD Overwrite To Format the attached USB drive HDD Format USB Format To Format the HDDTo Set Alarms Alarm SetupTypes of Alarms Alarm TriggersMobile Setup PTZ SetupMotion Detection Menu Motion DetectionTo change the status of motion detection for each camera Motion Area Mask To adjust the MD areaMD Area Date and Time System SetupMaintenance Set automatic maintenance, reboots and updates System Setup MenuTo adjust the time format To adjust the dateTo adjust the time To adjust the date formatDaylight Savings Time DST To customize the LCD-DVR daylight savings time adjustmentTime Setup with DST options To Change the Device ID Password SetupTo Enable Password Protection To Change the PasswordVideo Setup Video SetupTo adjust the resolution for your monitor To adjust your video systemSystem Information Language Setup English onlyTo adjust the language LanguageSystem Maintenance Playback Screen PlaybackPlayback To view footage though your computer Software InstallationPlayback Computer PlaybackMultiple Folders One VideoAn Entire Folder Increase Rate Backward FrameForward Frame Decrease Rate20. ST Video functions from the bottom bar are as followsDate TimeTo save a section of video Setting Menu for Advanced Users onlyHelp Menu To adjust the video settingsWhen the settings are adjusted to your liking, select OK Processor Amplification ControlRequirements Connecting DVR to a RouterNetwork Guide Preparing Your Computer for Viewing the LCD-DVR Finding your DVR’s IP AddressIf this is an option Network GuideMethod Viewing Your DVR on Your Computer Click apply Click OKInstalling the ActiveX controls Log in to the DVR Using Internet ExplorerOption Viewing Your DVR Outside of Your NetworkOption 1 recommended Port forward Home OptionOpen another web browser Testing Port ForwardingIf YOU Cannot Connect Error / Page cannot be displayedDdns Dynamic DNS To Configure the DVR to Work with DdnsFill out Ddns setup with Dyndns account information Next page has information about creating your host name Following instructions are for DYNDNS.org setupTo set up a DynDNS name for your DVR LOG Into the Account and Setup a Ddns HostLogging Into Software Default PasswordDefault Password123456 To View DVR Through Host NameOnline Software Record Live ModeCruise Setup PTZ Camera ControlsOther Mouse Options To set up cruiseOnline Software PTZ OptionsTo narrow down footage to search through To search through footagePlayback options from left to right are as follows To set your DVR for schedule record Record ModeRecord Mode Press select Select apply to save settingsTo copy one day’s schedule to another day Schedule adjustTo change the schedule RedAlarm Setup Information to select should be specified in the PTZ manual Network Setup MenuFile Save Path SettingsTo change where the files are saved Internet BandwidthTo turn the DVR daylight saving time on Make sure password enable is set to onTo customize the DVR’s daylight saving time adjustment Logout Host InfoFrom your computer or iPhone Set User name, password and port on DVRMobile Viewing Port ForwardingInformation From your computerFrom your BlackBerry From your phone Windows Mobile setupInstall viewing software, from your computer Play/Pause Snapshot PTZ Controls Full Screen ViewFrom your mobile phone Phone will begin preparation to installSymbian Mobile Troubleshooting Function off Power sourceRecord function ’clock PMSide of DVR Port Forwarding may not be set up correctlySetting that will work in most networking situations ConnectSpecifications Supports up to 8 letters Yes Pelco-D, Pelco-P10 sec ModePIN DIN Female Connection connects to male RCA What is IncludedFeatures Camera Power Supply PortsDrilling Template Wiring InstructionsIP65 Color Sharp CCDTV Lines YesSupport@SVAT.com 888.771.1701Description Additional AccessoriesVisit US on the WEB