![](/images/new-backgrounds/1131275/13127541x1.webp)
DXC- |
Location and Function of Parts |
Replacing the Lithium Battery
D30WS/P(E)/V1 | 5 GAIN UP indicator (orange) |
This lights when the gain is 3 dB or more.
6 Eyepiece focusing knob
Turn this to adjust the viewfinder focus to match your
Chapter1 | eyesight. (See page 79.) | |
7 Accessory fixing screw hole | ||
Overview | ||
Attach optional video lights or other accessories here. | ||
8 Tally lamp | ||
| ||
| When the TALLY switch is in the ON position, this | |
| operates in the same way as the REC/TALLY | |
| indicators 3. | |
| 9 Eyepiece release catch | |
| To view the viewfinder screen directly, press this | |
| catch, and hinge up the eyepiece. | |
| 0 BRIGHT (brightness) control | |
| This adjusts the brightness of the viewfinder image. | |
| (See page 79.) | |
| !Á CONTRAST control | |
| This adjusts the contrast of the viewfinder image. (See |
The camera head uses a lithium battery (CR2032) to retain date and time data.
When the lithium battery’s voltage falls, the clock indication dose not appear. Replace the lithium battery and set the clock (see page 77).
1 Pull the upper part of the battery cover (on the rear of the camera head) forward and turn the cover clockwise.
For detaching the VTR or camera adaptor, see “Fitting a VTR” next page.
Note
•Carefully read the instructions for replacing the lithium battery. Lithium batteries may explode if misused.
•Use only
Rear of the camera head
Battery cover
Chapter 2 Fitting and Chapter 2 Fitting andConnectionsConnections
page 79.) |
!ª PEAKING control |
This adjusts the outline intensity of the viewfinder |
image. (See page 79.) |
!£ TALLY switch |
Set this switch to the ON position to use the tally lamp |
8. |
!¢ Viewfinder connector |
Connect this to the VF connector (front) on the camera |
head. |
20 Chapter 1 Overview
2 Take out the lithium battery.
Press down and pull out toward you.
3 Reverse step 2 to insert a replacement lithium battery. Make sure that the + symbol on the battery is facing you.
4 Close the battery cover.
Chapter 2 Fitting and Connections | 21 |