![](/images/new-backgrounds/1131275/13127559x1.webp)
Power Supply
Camera Adaptor Power Supply
The camera adaptor automatically operates on power supplied to the VTR/CCU/CMA connector from the portable VTR,
Note
Before use, check that the device connected to the
VTR/CCU/CMA connector is able to provide the
Chapter2 | power required by the camera. | |
| ||
| If it is not able to provide the necessary power, or | |
FittingandConnections | when it is necessary to prolong the operating time, use | |
the camera with a separate power supply. | ||
|
Basic Procedure for Shooting
ZEBRA switch
Focusing ring
POWER switch
FILTER control
VTR button
RET button
1 | Attach the VTR or camera adaptor to the camera | 3 |
| head, then turn each device’s power on. |
|
2 | Set the FILTER control appropriately for the |
|
| lighting conditions. |
|
Chapter 3 Shooting
Chapter 3 Shooting
Filter setting | Lighting conditions | |
1 | (3200K) | Studio halogen lighting (incandescent), |
|
| sunrise and sunset. |
2 | (5600K + 1/8 | Sunlight. |
ND) | This setting includes a 1/8 neutral density | |
|
| filter (reducing the exposure by the |
|
| equivalent of three stops). Use it to prevent |
|
| hunting1) or to reduce the depth of field2). |
3 | (5600K) | Cloudy or rainy outdoor shooting, and |
|
| fluorescent lighting. |
4 | (5600K + | Sunlight. |
1/64ND) | This setting includes a 1/64 neutral density | |
|
| filter (reducing the exposure by the |
|
| equivalent of six stops). Use it to prevent |
|
| hunting1) or to reduce the depth of field2). |
4
5 Check the lens settings (pages 26 and 27) and flange focal length adjustment (page 80).
6
7 Check the sound system settings.
•Microphone connections
•Settings on the VTR (refer to the VTR instructions)
(continued)
DXC- |
|
|
D30WS/P(E)/V1 | 38 | Chapter 2 Fitting and Connections |
|
..........................................................................................................................................................................................................
1) Hunting: This occurs if the automatic iris function is not | 2) Depth of field: This is the range over which the subject |
able to reach a stable state, and as a result the image | is sharply in focus. |
brightness keeps changing, alternately lighter and darker. | Chapter 3 Shooting 39 |
|