![](/images/new-backgrounds/1131275/13127547x1.webp)
Fitting the Lens
In the case of the
1 Remove the retaining rubber which prevents the lens mount from coming loose, then raise the lens fixing lever, and remove the lens mount cap.
Retaining rubber
4 Using the triangular mark as a guide, push the lens connector into the LENS connector on the camera head, until it clicks into place. Fasten the cable with the clamps.
Chapter 2 |
|
Fitting and | 2 With the lens fixing lever |
Connections | |
| |
| turned fully counterclockwise, |
| push in the lens, aligning the |
| projection on the lens with the |
| cutout on the camera. |
3 Supporting the lens, turn the lens fixing lever fully clockwise. Replace the retaining rubber on the lens mount.
Lens mount cap
Align and push in.
Lens fixing lever | If using a lens with a |
This camera head has a | |
| lens cable has a |
| |
| (manufactured by Fujinon) or equivalent. |
LENS connector
Triangular mark
Fitting optional filters
Loosen the lens hood fixing screw to remove the lens hood, then attach the filter.
Remove lens hood
Lens hood fixing screw
Filter (optional)
Chapter 2 Fitting and Connections
DXC- |
|
|
D30WS/P(E)/V1 | 26 | Chapter 2 Fitting and Connections |
|
Chapter 2 Fitting and Connections | 27 |