Sony DXC-D30WSP service manual Battery Pack Operating Times, ItemSettings

Page 8

1-4

Advanced Menu Settings

Video Output and Viewfinder Picture

The video output and viewfinder picture of this camera vary as shown below according to the settings of the 16:9/4:3 item and the VF SCAN item of the Advanced menu.

Subject

2/3-inch optics

Item

Settings

 

 

16:9/4:3

16:9

 

 

VF SCAN

AUTO

 

 

 

 

The camera outputs 16:9 video. The scan size of the viewfinder picture is 16:9 size.

Viewfinder picture

Battery Pack Operating Times

The following table shows the maximum continuous operating times when this camera (including viewfinder) is operated at normal temperature under battery pack power. The times varies depending on the battery pack and attached equipment.

Battery pack

When the camera is coupled to:

 

Camera adaptor

Portable VTR

 

 

(DSR-1/1P or

 

 

PVV-3/3P)

NP-1B

Approx. 90 minutes

Approx. 50 minutes

NP-1A

Approx. 70 minutes

Approx. 35 minutes

BP-90A a)

Approx. 105

 

 

minutes

a)The DC-500 battery case is required when using the BP- 90A battery pack. The BP-90A cannot be used when a camera adaptor is coupled to the camera.

4:3 effective area

16:9 effective area

Item

16:9/4:3

VF SCAN

Viewfinder picture

Settings

16:9

FULL

The camera outputs 16:9 video. The viewfinder picture is 16:9 video that has been stretched vertically to completely fill the display area.

ItemSettings

DXC-

16:9/4:3

VF SCAN

Viewfinder picture

4:3

AUTO or FULL

The camera outputs 4:3 video that has been electronically extracted from the effective area of the 16:9 aspect ratio. Compared to 16:9 video, this video appears as if a zoom lens has been adjusted slightly toward the telephoto end. The picture in the viewfinder is 4:3 video, which completely fills the display area.

D30WS/P(E)/V1

16

17

Image 8
Contents DXC-D30WS DXC-D30WSP Varning Manual Structure Introducing this manual Related manualsTable of Contents Digital Video Camera Operating instructionsTable of Contents About This Manual Overview Advanced Menu SettingsFeatures ItemSettings Battery Pack Operating TimesAdvanced Menu Settings Video Output and Viewfinder Picture Specifications Supplied accessoriesRelated Products DXC-D30WSL/D30WSPL Camera HeadSpecifications Measuring Horizontal ResolutionHorizontal resolution in 169 mode Horizontal resolution in 43 modeChart of Optional Components and Accessories DXCCamera Head VCL-916BYA Zoom Lens DXF-701/701CE Viewfinder Using the Camcorder GripUsing Battery Packs Camera Adaptor Power Supply Table of Contents Product Configurations Camera adaptorFeatures Location and Function of Parts Camera HeadLocation and Function of Parts Front view Left and upper viewVCL-916BYA Zoom Lens DXF-701/701CE Viewfinder Location and Function of Parts Using the Camcorder Grip Fitting a VTRAttaching a camcorder grip to the DSR-1/1P To remove the VTRFitting a VTR Attaching a camcorder grip to the PVV-3/3PFitting optional filters If using a lens with a 6-pin connectorFitting the Lens Using an Optional Microphone Using AccessoriesUsing the Viewfinder Using Accessories Adjusting the Shoulder Pad PositionFitting to a Tripod Fitting an optional microphoneConnections Using Accessories Using the Carrying CaseConnecting a Portable VTR Connecting a Number of Cameras Using a Camera Control Unit ConnectionsConnected VTR VTRPower Supply Using Battery PacksBattery pack operating times Battery low indicationsBasic Procedure for Shooting Power Supply Camera Adaptor Power SupplyCamera with a separate power supply Filter setting Lighting conditionsBasic Procedure for Shooting Using the ClipLink FunctionShooting with the DSR-1/1P Reviewing the recordingUsing the Edit Search Function While Back Space Editing Setting Mark IN/OUT points as you shootSetting cue points as you shoot Shooting with the DSR-1/1PChanging the Viewfinder Display Using the Freeze Mix FunctionViewfinder Screen Indications Viewfinder Normal Indications Viewfinder Screen IndicationsViewfinder Normal Indications Contents and Settings of Each Viewfinder Basic MenuStatus Indications Basic Menu OperationsViewfinder Basic Menu Setting the recording time in secondsSetting the recording time in minutes Basic menu pages 8 Entering the titleDSR-1/1P To record a titleViewfinder Advanced Menu Advanced Menu OperationsTo change To return to the normal indicationsViewfinder Advanced Menu EZ mode settings Advanced menu pages 9 toAdvanced menu pages 13 To set the camera ID38Setup Files Calling up a Setup FileUsing the DSR-1/1P To call up files recorded onto a tape whenTo save setup files to a tape when using the DSR-1/1P Setup Files Changing File SettingsSaving File Settings Setting up the camera Using Data Recorded on Tape Using SetupNavi and SetupLog with the DSR-1/1PSetup Files Using SetupNavi and SetupLog with the DSR-1/1P Recording the Menu Settings onto a TapeViewing SetupLog Data To abort the data recording while in progressWhite Balance Adjustment Saving an Appropriate White Balance Value in MemoryWhite Balance Adjustment Light Sources and Color TemperatureUsing the ATW Auto Tracing White Balance Function Using the Preset White Balance Settings44Black Balance Adjustment Shutter Settings Setting the shutter speed, CLS and EVS functionShutter speeds CLS Clear Scan functionSetting the Clock and Timestamping Recordings Shutter SettingsHow to set the date and time When shooting is finishedViewfinder Screen Adjustments 46Setting the Clock and Timestamping RecordingsAdjusting the Lens Flange Focal Length AdjustmentIris Adjustments Using the zebra pattern in manual adjustment modeSettings for Special Cases 48Adjusting the Lens MacrophotographyEnding close-up shooting Reducing the size of the imageSettings for Special Cases Adjusting Color in the Specified AreaCharacteristics of CCD Sensors Important Notes on OperationDXC-D30/D30P Camera Head VCL-916BYA Zoom LensDesign and specifications are subject to change DXF-701/701CE ViewfinderHood VCL-915BYA/916BY/1012BY Zoom Lens52Chart of Optional Components and Accessories VHS VTRRemoval of Side Plate Board LayoutRemoval of Cabinet Replacement of Main Parts Replacement of CCD UnitDisassembly AssemblyCN2 Pin Signal Specification Connectors and CablesConnector Input/Output Signals CAMERA/CA 76P, Male Remote 10P, Female VF 20P, Female HOW to Handle of AT-125 Board Connection ConnectorHow to Attach of the Extension Board EX-591 Replacement Way of ROMIC102DC-DC Converter Voltage External View Check Point Voltage ValueService Mode Operation Service modeMenu screen ConnectionReset object item and standard set value for setting Table Standard set value1 Reset 3 Flare Adjustment4 Pre Knee Setting 2 Standing Correction5 Component Level Adjustment 6 CLP Level Adjustment7 Chroma/VF Adjustment 8 SC adjustment9 Various kinds items setting 10 Test Mode11 Head Block No. information 12 RG, SUB communication13 Various items setting 14 Title Color setting15 Various items setting 16 Knee setting 3 not in used17 Various setting 18 Selfdiagnosis19 Selfdiagnosis 20 Selfdiagnosis21 Selfdiagnosis RC-PMPDRC-CY RC-CCRDSP COM Memory22 Present unit condition indication 23 TG ROM OperationGrayscale chart PreparationEquipment Required Connection Pattern box PTB-500Switch Setting Before Adjustment Adjustment Item Sensitivity Measurement Confirmation Before AdjustmentColor Bar Signal Confirmation Camera Adjustment Sub-Carrier Frequency AdjustmentINT SC-H Phase Adjustment 3. Y/R-Y/B-Y CLP Level Adjustment4. Y/SYNC/R-Y/B-Y Level Adjustment Carrier Balance AdjustmentAdjusting point LVL UP LVLChroma VBS Level Adjustment VBS Level Adjustment→ SET UP on MAT Dest Smpte To be extended ES-22 board PreparationSpecification for Ntsc YC Level AdjustmentChroma YC Level Adjustment VF SYNC/BLKG Level Adjustment Specification a = 165 ±5 mVVF Sync → VF Blkg → CAM/DCC+Pedestal Adjustment Shading AdjustmentTest point Spec Mode VA-185 board → R Shad G Shad B ShadFlare Adjustment MIC LEVEL/MIC Level IND AdjustmentAdjusting point Lens iris →CAM/DCC+Character Position Adjustment Title AdjustmentAdjusting point 1CV3/MB-785 board Specification Adjusting point 1CV1/MB-785 board SpecificationPage Sony Corporation

DXC-D30WS, DXC-D30WSP specifications

The Sony DXC-D30WSP and DXC-D30WS are professional broadcast cameras known for delivering exceptional image quality, reliability, and versatility. Both models are part of Sony's renowned lineup of 3-chip CCD cameras, designed to meet the high demands of television production and video broadcasting.

At the heart of the DXC-D30WSP and DXC-D30WS is a high-resolution 3CCD image sensor system. This technology allows for accurate color reproduction and enhanced sensitivity, making it suitable for various lighting conditions. The cameras produce vibrant images with low noise levels, ensuring that footage remains clear and detailed, even in challenging environments.

One of the standout features of these cameras is their adaptability. The DXC-D30WSP model is equipped with a wide range of interchangeable lenses, allowing operators to select the appropriate lens for their specific shooting needs. This flexibility is crucial for cinematographers and videographers who work on diverse projects, from documentaries to commercials.

The DXC-D30WS, which is similar in many ways to its counterpart, emphasizes ease of use with its ergonomic design and intuitive controls. This model is particularly well-suited for field work, as it is lightweight and portable, enabling easy transport without sacrificing performance. Both cameras have comprehensive connectivity options, including SDI and analog outputs, making them compatible with various production environments.

In terms of performance, the Sony DXC-D30WSP and DXC-D30WS feature enhanced digital signal processing. This technology optimizes image quality by improving sharpness, contrast, and color fidelity. In addition to standard recording formats, these cameras support multiple aspect ratios, making them versatile tools for filmmakers who want to achieve specific artistic visions.

Furthermore, both models include advanced white balance and exposure control features, allowing operators to fine-tune settings for optimal results. This precision is critical for maintaining consistent visual quality throughout a production.

In conclusion, the Sony DXC-D30WSP and DXC-D30WS are distinguished by their robust build quality, advanced imaging technologies, and user-friendly designs. They are ideal choices for professionals seeking reliable, high-performance cameras that can adapt to a wide range of shooting situations. Whether for broadcast television or independent filmmaking, these cameras remain a valuable asset in any production setup, ensuring that creators can capture stunning visuals with ease.