Sony DXC-D30WSP Using Accessories, Using the Viewfinder, Using an Optional Microphone

Page 25

DXC-D30WS/P(E)/V1

Using Accessories

Using the Viewfinder

Removing the Viewfinder

Remove any microphone from the viewfinder before beginning.

Left eye adaptor

By fitting a left eye adaptor, you can use the camera with your left eye to the viewfinder.

Note

You cannot stow the camera attached with a left eye adaptor in the LC-421 Carrying Case.

For details, consult your Sony dealer.

Fitting the optional CAC-12 Microphone Holder

Remove the two retaining screws (M3 × 8) for the optional microphone holder, then use these screws to attach the CAC-12 Microphone Holder.

Chapter 2 Fitting and

1 Pull the viewfinder connector out of the VF connector on the front of the camera head.

VF connector

Using an Optional Microphone

To use a long microphone such as the optional ECM- 670/672, remove the supplied microphone holder, and fit an optional CAC-12 Microphone Holder to the camera, then mount the microphone in this holder.

Screws removed from the camera

Chapter 2 Fitting and

Connections

2 Loosen the viewfinder left-to- right position fixing ring, then pulling up the retaining catch, slide the viewfinder out.

Retaining catch

Viewfinder left-to-right position fixing ring

CAC-12

Removing the supplied microphone holder

Remove the two microphone holder retaining screws (M4 × 6) from the viewfinder, remove the microphone holder, then replace the screws in their original positions.

Microphone

M4 × 6 screws

holder

 

Connections

To fit the viewfinder

Reverse the removal procedure.

Adjusting the viewfinder position

To adjust the viewfinder left-to-right position, loosen the left-to-right fixing ring, and to adjust the front-to- back position loosen the front-to-back position locking catch.

Viewfinger front-to-back

Viewfinder left-to-right

28

Chapter 2 Fitting and Connections

position locking catch

position fixing ring

Chapter 2 Fitting and Connections

29

1-21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents DXC-D30WS DXC-D30WSP Varning Introducing this manual Related manuals Manual StructureTable of Contents Operating instructions Digital Video CameraTable of Contents Features Overview Advanced Menu SettingsAbout This Manual Advanced Menu Settings Video Output and Viewfinder Picture Battery Pack Operating TimesItemSettings Supplied accessories SpecificationsRelated Products DXC-D30WSL/D30WSPL Camera HeadMeasuring Horizontal Resolution SpecificationsHorizontal resolution in 169 mode Horizontal resolution in 43 modeDXC Chart of Optional Components and AccessoriesUsing Battery Packs Camera Adaptor Power Supply Using the Camcorder GripCamera Head VCL-916BYA Zoom Lens DXF-701/701CE Viewfinder Table of Contents Camera adaptor Product ConfigurationsFeatures Camera Head Location and Function of PartsLocation and Function of Parts Left and upper view Front viewVCL-916BYA Zoom Lens DXF-701/701CE Viewfinder Location and Function of Parts Fitting a VTR Using the Camcorder GripAttaching a camcorder grip to the DSR-1/1P To remove the VTRAttaching a camcorder grip to the PVV-3/3P Fitting a VTRFitting the Lens If using a lens with a 6-pin connectorFitting optional filters Using the Viewfinder Using AccessoriesUsing an Optional Microphone Adjusting the Shoulder Pad Position Using AccessoriesFitting to a Tripod Fitting an optional microphoneConnecting a Portable VTR Using Accessories Using the Carrying CaseConnections Connections Connecting a Number of Cameras Using a Camera Control UnitConnected VTR VTRUsing Battery Packs Power SupplyBattery pack operating times Battery low indicationsPower Supply Camera Adaptor Power Supply Basic Procedure for ShootingCamera with a separate power supply Filter setting Lighting conditionsUsing the ClipLink Function Basic Procedure for ShootingShooting with the DSR-1/1P Reviewing the recordingSetting Mark IN/OUT points as you shoot Using the Edit Search Function While Back Space EditingSetting cue points as you shoot Shooting with the DSR-1/1PViewfinder Screen Indications Using the Freeze Mix FunctionChanging the Viewfinder Display Viewfinder Screen Indications Viewfinder Normal IndicationsViewfinder Normal Indications Viewfinder Basic Menu Contents and Settings of EachStatus Indications Basic Menu OperationsSetting the recording time in minutes Setting the recording time in secondsViewfinder Basic Menu Entering the title Basic menu pages 8DSR-1/1P To record a titleAdvanced Menu Operations Viewfinder Advanced MenuTo change To return to the normal indicationsViewfinder Advanced Menu Advanced menu pages 9 to EZ mode settingsAdvanced menu pages 13 To set the camera IDCalling up a Setup File 38Setup FilesUsing the DSR-1/1P To call up files recorded onto a tape whenSaving File Settings Setup Files Changing File SettingsTo save setup files to a tape when using the DSR-1/1P Setup Files Using SetupNavi and SetupLog with the DSR-1/1PSetting up the camera Using Data Recorded on Tape Recording the Menu Settings onto a Tape Using SetupNavi and SetupLog with the DSR-1/1PViewing SetupLog Data To abort the data recording while in progressSaving an Appropriate White Balance Value in Memory White Balance AdjustmentLight Sources and Color Temperature White Balance AdjustmentUsing the ATW Auto Tracing White Balance Function Using the Preset White Balance SettingsSetting the shutter speed, CLS and EVS function 44Black Balance Adjustment Shutter SettingsShutter speeds CLS Clear Scan functionShutter Settings Setting the Clock and Timestamping RecordingsHow to set the date and time When shooting is finished46Setting the Clock and Timestamping Recordings Viewfinder Screen AdjustmentsFlange Focal Length Adjustment Adjusting the LensIris Adjustments Using the zebra pattern in manual adjustment mode48Adjusting the Lens Macrophotography Settings for Special CasesEnding close-up shooting Reducing the size of the imageAdjusting Color in the Specified Area Settings for Special CasesCharacteristics of CCD Sensors Important Notes on OperationVCL-916BYA Zoom Lens DXC-D30/D30P Camera HeadDXF-701/701CE Viewfinder Design and specifications are subject to changeHood VCL-915BYA/916BY/1012BY Zoom LensVHS VTR 52Chart of Optional Components and AccessoriesRemoval of Cabinet Board LayoutRemoval of Side Plate Replacement of CCD Unit Replacement of Main PartsDisassembly AssemblyCN2 Connector Input/Output Signals Connectors and CablesPin Signal Specification CAMERA/CA 76P, Male Remote 10P, Female VF 20P, Female Connection Connector HOW to Handle of AT-125 BoardHow to Attach of the Extension Board EX-591 Replacement Way of ROMIC102External View Check Point Voltage Value DC-DC Converter VoltageService mode Service Mode OperationMenu screen ConnectionStandard set value Reset object item and standard set value for setting Table3 Flare Adjustment 1 Reset4 Pre Knee Setting 2 Standing Correction6 CLP Level Adjustment 5 Component Level Adjustment7 Chroma/VF Adjustment 8 SC adjustment10 Test Mode 9 Various kinds items setting11 Head Block No. information 12 RG, SUB communication14 Title Color setting 13 Various items setting15 Various items setting 16 Knee setting 3 not in used18 Selfdiagnosis 17 Various setting20 Selfdiagnosis 19 SelfdiagnosisRC-PMPD 21 SelfdiagnosisRC-CY RC-CCRMemory DSP COM23 TG ROM Operation 22 Present unit condition indicationPreparation Grayscale chartEquipment Required Connection Pattern box PTB-500Switch Setting Before Adjustment Adjustment Item Color Bar Signal Confirmation Before AdjustmentSensitivity Measurement Confirmation Sub-Carrier Frequency Adjustment Camera AdjustmentINT SC-H Phase Adjustment 3. Y/R-Y/B-Y CLP Level AdjustmentCarrier Balance Adjustment 4. Y/SYNC/R-Y/B-Y Level AdjustmentAdjusting point LVL UP LVLVBS Level Adjustment Chroma VBS Level Adjustment→ SET UP on MAT Dest Smpte To be extended ES-22 board PreparationChroma YC Level Adjustment YC Level AdjustmentSpecification for Ntsc Specification a = 165 ±5 mV VF SYNC/BLKG Level AdjustmentVF Sync → VF Blkg → CAM/DCC+Shading Adjustment Pedestal AdjustmentTest point Spec Mode VA-185 board → R Shad G Shad B ShadMIC LEVEL/MIC Level IND Adjustment Flare AdjustmentAdjusting point Lens iris →CAM/DCC+Title Adjustment Character Position AdjustmentAdjusting point 1CV3/MB-785 board Specification Adjusting point 1CV1/MB-785 board SpecificationPage Sony Corporation

DXC-D30WS, DXC-D30WSP specifications

The Sony DXC-D30WSP and DXC-D30WS are professional broadcast cameras known for delivering exceptional image quality, reliability, and versatility. Both models are part of Sony's renowned lineup of 3-chip CCD cameras, designed to meet the high demands of television production and video broadcasting.

At the heart of the DXC-D30WSP and DXC-D30WS is a high-resolution 3CCD image sensor system. This technology allows for accurate color reproduction and enhanced sensitivity, making it suitable for various lighting conditions. The cameras produce vibrant images with low noise levels, ensuring that footage remains clear and detailed, even in challenging environments.

One of the standout features of these cameras is their adaptability. The DXC-D30WSP model is equipped with a wide range of interchangeable lenses, allowing operators to select the appropriate lens for their specific shooting needs. This flexibility is crucial for cinematographers and videographers who work on diverse projects, from documentaries to commercials.

The DXC-D30WS, which is similar in many ways to its counterpart, emphasizes ease of use with its ergonomic design and intuitive controls. This model is particularly well-suited for field work, as it is lightweight and portable, enabling easy transport without sacrificing performance. Both cameras have comprehensive connectivity options, including SDI and analog outputs, making them compatible with various production environments.

In terms of performance, the Sony DXC-D30WSP and DXC-D30WS feature enhanced digital signal processing. This technology optimizes image quality by improving sharpness, contrast, and color fidelity. In addition to standard recording formats, these cameras support multiple aspect ratios, making them versatile tools for filmmakers who want to achieve specific artistic visions.

Furthermore, both models include advanced white balance and exposure control features, allowing operators to fine-tune settings for optimal results. This precision is critical for maintaining consistent visual quality throughout a production.

In conclusion, the Sony DXC-D30WSP and DXC-D30WS are distinguished by their robust build quality, advanced imaging technologies, and user-friendly designs. They are ideal choices for professionals seeking reliable, high-performance cameras that can adapt to a wide range of shooting situations. Whether for broadcast television or independent filmmaking, these cameras remain a valuable asset in any production setup, ensuring that creators can capture stunning visuals with ease.
Top Page Image Contents