![](/images/new-backgrounds/1131275/131275175x1.webp)
3-3-16. Character Position Adjustment
Equipment: Color monitor (or, B/W monitor)
Preparation: OUTPUT/DL/DCC+switch/camera side → BARS
Test point: MONITOR OUT connector/camera side
Adjustment Procedure
1.Set the “MARKER” to “ON” on the BASIC menu.
2.Set the “MARKER” to “CENT/90 %” on the “PAGE 4” of ADVANCE menu.
3.Select “PAGE 9” on the ADVANCE menu, set “16:9/4:3” to “16:9” position.
PAGE 9 (NEXT | PREV | ) | Safty zone |
| |
16:9/4:3 : 16:9 |
|
|
| ||
WIDE ID | : ON |
|
| TONE |
|
VF SCAN | : AUTO | TONE | "b" | ||
|
|
| XXdB |
| |
|
|
| XXdB | "a" | |
|
|
| XXXX | XXXX |
|
|
|
|
|
| |
EXIT MENU (YES | ) |
|
|
|
4.Adjusting point: 1CV3/MB-785 board
Specification: | “a” =“b” |
| (The space between “a” and “b” are |
| nearly equal) |
3-3-17. 4:3 Title Adjustment
Equipment: Color monitor (or, B/W monitor)
Preparation: OUTPUT/DL/DCC+switch/camera side → BARS
Test point: MONITOR OUT connector/camera side
Adjustment Procedure
1.Set the “MARKER” to “ON” on the BASIC menu.
2.Set the “MARKER” to “CENT/90 %” on the “PAGE 4” of ADVANCE menu.
3.Select “PAGE 9” on the ADVANCE menu, set “16:9/4:3” to “4:3” position.
4.Select “PAGE 8” on the ADVANCE menu.
PAGE 8 (NEXT PREV
)
CLOCK IND : CAM |
|
|
CLOCK SET : (START | ) | |
|
| TONE |
|
| XXdB |
|
| XXXX |
9 7 | 1 1 | 0 8 |
1 4 : 5 9 |
| |
EXIT MENU (YES | ) |
|
5.Set “CLOCK IND” to “CAM” position, (See above
monitor screen) and set the cursor to “CLOCK SET” position. Push the UP 4 switch, then, “(START → 4)” is changed to “(END → 4)” and the TITLE is
displayed.
PAGE 8 (NEXT | PREV | ) |
|
|
|
CLOCK IND : CAM |
| Y Y | M M | D D | |
| 9 7 | 1 1 | 0 8 | ||
CLOCK SET : (START | ) | ||||
|
|
|
| "a" | |
|
| TONE |
|
|
|
|
| XXdB |
|
|
|
Y Y | M M | D D |
|
|
|
9 7 | 1 1 | 0 8 | "T" |
|
|
1 4 : 5 9 |
|
|
| ||
|
|
|
| ||
EXIT MENU (YES | ) |
|
|
|
|
*In case of “DD MM YY”, the adjustment is the same manner.
Note : In case of “ MM DD YY ”, set the DATE position as follows. 11 08 97
MM DD YY
11 08 97 "a"
6.Adjusting point: 1CV1/MB-785 board
Specification: | “a” =0 |
Note : After adjustment, set the clock “T” for the present time.
CV1
CV3
|