Hasselblad 10026 service manual General description, Camera type

Page 5

1:1

Camera body 503CW

General description

Camera type:	Single lens reflex camera with 6 x 6 (2 1/4 x 2 1/4 in) max.
	film size. Interchangeable lenses, film magazines, viewfinders
	and focusing screens.
Design:	Mechanical, with an aluminium alloy camera body shell cast in
	one piece.
Viewfinders:	Folding focusing hood interchangeable with reflex viewfinder,
	prism viewfinders with or without built-in exposure meter or
	magnifying hoods.
Film advance:	Manual advance or motor driven with Winder CW.
	Simultaneous shutter cocking.
	Winder CW winding time: 1.05 sec, approx. 0.8 frames/sec
	in continuous mode.
Flash control:	TTL/OTF-metering. ISO 16 - 1000 with flash adaptors
	SCA390 or SCA590 for connection with flash units from the
	SCA300 or SCA500 systems respectively. Metering area within
	40 mm diameter in the centre of the image area.
	Note! From camera serial No. 19ER18271 the ISO range is
	changed to 64 - 4000.
Tripod coupling:	1/4 in and 3/8 in socket threads and base plate for quick
	coupling attachments.
Lens mount:	Hasselblad bayonet mount for CF and C lenses.
Focusing screen:	Hasselblad Acute-Matte D* focusing screen.
	Sales code No. 42204.
External
dimensions:	91L x 114W x 110H (3 9/16 x 4 1/2 x 4 11/32 in).
Weight:	610 g.
*Acute-Matte D designed by Minolta
Revision 1	June 1998

Image 5

Contents Göteborg Sweden Victor Hasselblad AB Contents list Camera body 503CW Signal arm shortened 501C and 503CXi Updated pages 503CXiFitted with wrong spacers 503C/M and 503CX Flash metering circuit redesigned 503CX04/01 New CD-ROM Version Camera type General descriptionRelease sequence Tools Used for Tool No DescriptionTool No Description Used for Camera shell Rear plate 30300 including auxiliary shutter Circuit board 22575 *22882Front bayonet plate Mechanism plate Focusing screen frameRight hand wall Gear housing Reassembly 816802 Fitting the mechanism plate to the right hand wall 821631 13108 814827 13355 13280 13362 Rear plate Intermediate gear Perform the necessary adjustment as described in sectionFront plate Adjustment Focal length Adjustment of the front key’s angular positionAngle 15-16 o with the bayonet plate tool 904644 pushed Adjustment of the release mechanism 15 mm Adjustment of the release sequence Fitting the damping ring Fitting the Circuit board 22575 *22882 Adjustment Fitting the camera body into the shellFinal checks 510 Camera body 503CW 511 Camera body 503CW 512 Camera body 503CW 513 Camera body 503CW Front gear Front plate reassemblyFront bayonet plate Exchanging the auxiliary shutter Exchanging the mirrorShim washers Revision May Pos Pcs Spare Description Remark May Camera body 503CW Camera body 503CW Camera body 503CW September Camera body 503CW Camera body 503CW Camera body 503CW Camera body 503CW Camera body 503CW October May Camera body 503CW Camera body 503CW 151 Spare parts not listed are the same as for 503CW 152 152 153 153 154 154 155 Coupling Crank support 161 Pos Pcs No Spare Part No Description Remark 162 Pos Pcs Spare Description Remark 163 163 171 171 172 172 173 173 174 174 175 175 181 181 182 182 183 183 184 184 185 January 191 October 192 192 193 193