Sterling operating instructions SSV 05/2R Cleaning/replacing the filter cartridge, Disassembly

Page 29

SSV 05/2R

5.2. Cleaning/replacing the filter cartridge

»

Switch off the unit.

Disconnect the mains plug.

Disassembly

Remove the filter cartridge (A).

Blow out the filter cartridge (A) from the inside out by means of compressed air or replace the filter.

Open the toggle-type fastener (B) and fold the hopper lid upwards.

Check the sieve (C) within the lid for material residue. Disassembling the sieve for cleaning: draw the sieve out of the fit of the sealing ring.

Clean the sieve (C) by means of compressed-air.

Replace the sieve and sealing ring in case of damage.

SM4-610

A

A

C

B

Maintenance 28

Image 29

Contents Sterling Material Processing Operating Instructions Single Conveyor Unit SSV 05/2REdition 08/99 Technical serviceSSV 05/2R Sterling Material Processing SSV 05/2R Parts and Service Department Table of contents SSV 05/2R Technical data Safety instructions Safety instructionsSSV 05/2R SSV 05/2R Explanations and information SSV 05/2R For your safety SSV 05/2R SSV 05/2R SSV 05/2R For the safety of the units Installation instructions SSV 05/2R General information SSV 05/2R Installing the conveyor hopper SSV 05/2R Installing the control and maintenance unit SSV 05/2R Connecting the compressed-air supply SSV 05/2R Electrical connection Functional description SSV 05/2R Method of functioning Control and maintenance unitSet-up SSV 05/2R Preparations Setting the mixing ratio of the componentsFilling level too high Filling level too lowSet-up Maintenance SSV 05/2R Maintenance intervals Disassembly SSV 05/2R Cleaning/replacing the filter cartridgeAdjusting the level probe SSV 05/2R AssemblyTest steps SSV 05/2R Trouble-shooting Problem RemedyTechnical data SSV 05/2R Dimension sheet SSV 05/2R Spare parts list SSV 05/2R Pos ID-No Designation