JVC TK-C1430 manual RM-P2580 System,
System with up to 8 cameras

MONITOR screen

(example showing camera ID as “05”)

CONNECTION/INSTALLATION

RM-P2580 System

System with up to 8 cameras

Camera 1

Camera
TK-C1430	Control signal cable
	Video signal cable

MACHINE ID:1 (Menu screen)

RX TERM: OFF

Camera

AC24V

Power or

cable DC12V

(switch)

Camera 2

MACHINE ID:2 (Menu screen)

RX TERM: OFF (switch)

Camera 8

MACHINE ID:8 (Menu screen)

RX TERM: ON (switch)

TK-C1430

AC24V or DC12V

Camera

TK-C1430

AC24V or DC12V

TO

CAMERA

TO CAMERA

POWER

Remote Control Unit	OFF
RM-P2580	AC INPUT

ON

		•	•	•	•	•	CAM SW Time lapse VCR
							OUT
									VIDEO IN
			CAMERA
				SW		COM
		DATA I / O					SERIAL-1	SERIAL-2
1	2	3	4	5	6	7	8		MONITOR
			VIDEO INPUT
							MONITOR MONITOR		OUTPUT 2
							OUTPUT OUTPUT
							1	2
1	2	3	4	5	6	7	8
			VIDEO OUTPUT

MONITOR

OUTPUT 1

MONITOR

MONITOR

When controlling with any system except the RM-P2580, execute proper settings using switches and menu screens according to the systems used. ( Page 14)

MEMO

•When operating a system using the RM-P2580, several cameras (up to 16) can be con- nected and used on one control signal cable. Consequently, an incorrect switch setting on just a single camera will cause the entire system to work incorrectly.

•Confirm switch settings on the screen as follows.

qConfirm that the image from the camera to be checked is displayed on the monitor.

wTurn OFF and then ON the AC 24 V power to the cam- era to be checked.

eThe camera begins the initial operation and characters similar to those shown in the illustration on the right appear on the monitor screen.

rConfirm that “DUPLEX” and “ID-□□” are displayed and that the ID number is the correct number (the number should be the same as the number of the VIDEO IN- PUT terminal to which the camera is connected on the

rear panel of the RM-P2580).

tIf wrong, set the camera ID again.

P R O T O C O L : D U P L E X I D - 0 5

“DUPLEX” should	The number shown in the
be displayed.	□ □ part of ID-□ □
	should be correct.

E-12