JVC TK-C1430 manual Specifications, Video OUT, Out, Dimensions Unit mm

Page 43

OTHERS

Specifications

Image pickup device:

1/3 type IT CCD, 752 (H) 582 (V)

Synchronization method :

Internal, Line lock, Full Genlock

Scanning frequency:

(H) 15.625 kHz, (V) 50 Hz

Resolution:

480 TV lines (H)

VIDEO OUT:

Composite video signal 1 V (p-p), 75 (BNC)

Y/C OUT:

Y: 1.0 V (p–p), 75

 

C: 0.3 V (p–p), 75

Video S/N ratio:

50 dB (AGC OFF)

Minimum required illumination:

0.9 lx (50 %, F1.2, AGC 20 dB)

0.45lx (50 %, F1.2, AGC 20 dB, LOLUX MODE)

0.45lx (25 %, F1.2, AGC 20 dB)

0.23lx (25 %, F1.2, AGC 20 dB, LOLUX MODE)

0.03lx (50 %, F1.2, AGC 20 dB, B&W MODE)

0.015 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, B&W MODE) 0.015 lx (25 %, F1.2, AGC 20 dB, B&W MODE)

0.03lx (50 %, F1.2, AGC 20 dB, SENSE UP 32)

0.014 lx (50 %, F1.2, AGC 20 dB, LOLUX MODE, SENSE UP 32)

Communication:

RS-422A or RS-485 (switchable)

 

 

9600 bit/s

 

 

Lens mount:

C/CS mount

 

 

Power supply and power consumption: AC 24 V ` 50 Hz/60 Hz, DC 12 V --- 530 mA

 

Ambient temperature:

–10 °C to 50 °C (operation)

 

 

0 °C to 40 °C (recommended)

 

Mass:

620 ˝

 

 

Accessory:

Instructions

2 Ferrite core

1

DIMENSIONS (Unit: mm)

4P plug

1

 

 

 

 

 

70

 

149

39

U1-32

 

138

 

55

63

 

35

 

 

 

 

42

 

 

 

71

41

1/4 – 20UNC

Design and specifications are subject to change without notice.

E-43

Image 43
Contents TK-C1430 Important Safeguards Page Safety Precautions Contents Memo FeaturesReference page or item Operating Precautions Rotation-preventive hole Controls, Connectors and IndicatorsLens mount Camera-mounting screw Hole 1/4 inchIris Iris Terminal VIDEO/DC Iris Selector SwitchCover 12 SET/AWC Set. Auto White Control Button13 , , , Up-and-down, left-and- right Button 15 INT/GL, LL Selector Switch for Synchronizing SystemDUPLEX, Simplex Selector Switch for Transmission System 17 RX.TERM-ON/OFF RX SignalTerminal ON/OFF SwitchThis lamp lights when power is supplied to the camera 22 Y/C OUT Y/C output connectorVideo OUT Video signal output connector Power Power indicator lamp System with up to 8 cameras RM-P2580 SystemWhen connecting  Connecting the control signal cable Setting the switches   Setting on the Menu screen Setting the switches ProceduresVideo Mount the lens according to the procedures described belowMounting the lens DC Iris Video IrisConnections on the back Installing the ferrite core Genlock connection  Control signal cablesFall Prevention Mounting the cameraSpecified screw M3 ⋅ 6 mm Installation of camera Level adjustment Lens adjustmentDoes not operate With a fixed-focus lens Back focus adjustment Back focus adjustment Lens Focus Adjustment ModeError message display Auto white balance control adjustmentChange of the set value displays a change mark ∗ Setting the menuMenu screen is displayed Selected sub-menu screen is displayedFlow of menu screen Menu SettingC SE T T I NGS I S L E VE L Normal AV Erage P EAK ALC Settings Screen Sync Adjust ScreenFunctions and set values Initial value Memo Memo OFF PriorityMotion BLCAuto ColourMode AUXVideo Adjust Screen Mode Select Screen Zoom Terminal MotionMAX Motion Detect Screen Alarm TimeArea Edit Factory Settings Screen Maintenance ScreenCommunication Screen EDIT1 screen is brought up BLC Editting ScreenSides having marks can be changed Manual Adjustment of White Balance Selected character is displayed flashing on and off Camera Title SettingScreen returns to Mode Select Then, the Camera Title screen is brought upMotion Detect screen Setting the Motion Detect FunctionSetting screen is brought up Select the item Area Edit onSet the B&W Item to Auto Output of Black-White/Color switching signalSet the B&W item to AUX B&W/COLOR Mode screen appearsCCD Spot screen will be dis- played White spot compensationOperation method Confirm that the cursor is at the itemOUT SpecificationsDimensions Unit mm Video OUTTK-C1430 Colour Video Camera