JVC TK-C1430 manual Terminal Motion, Zoom, Max

Page 33

Item		Functions and set values	Initial value

AUX	For setting the signal input or output of the AUX terminal.		(B&W IN)
TERMINAL	MOTION:	A signal is output if there is a change in the
	MOTION:	A signal is output if there is a change in the
		area set on the MOTION DETECT screen.
	B&W OUT: A signal is output when the camera switches
		to B&W or Colour mode.
	B&W IN:	Set to this position when inputting the B&W/
		Colour switching control signal to the AUX
		terminal. ( Page 11, 30.)

	MEMO
	• In setting B&W OUT, if you use an infrared illuminator in
	link motion, hunting can occur. To prevent this, we
	recommend that you link in motion this unit and the
	infrared illuminator, etc., by control signals after setting
	to B&W IN.
	• If the B&W item is set to AUX, the AUX TERMINAL item
	changes to [B&W IN] and can not be changed.

D.ZOOM	This function sets the maximum zoom ratio of the	x2
MAX	electronic zooming.
	[Set values: x1, x2, x4, x6, x8, x10]
	MEMO
	• The electronic zoom function can only be used by the
	communication command of exclusive controllers (RM-
	P2580, etc.).
	• Note Picture quality deteriorates under electronic
	zooming as it is accompanied by digital image
	processing.
	• When the electronic zoom magnification ratio is
	increased, there may be blurring in the upper center left
	of the screen. This is a characteristic of the main unit
	and is not a malfunction.

E-33

Image 33

Contents TK-C1430 Important Safeguards Page Safety Precautions Contents Features MemoReference page or item Operating Precautions Lens mount Controls, Connectors and IndicatorsCamera-mounting screw Hole 1/4 inch Rotation-preventive holeCover 12 SET/AWC Set. Auto White Control VIDEO/DC Iris Selector SwitchButton Iris Iris TerminalDUPLEX, Simplex Selector Switch for Transmission System 15 INT/GL, LL Selector Switch for Synchronizing System17 RX.TERM-ON/OFF RX SignalTerminal ON/OFF Switch 13 , , , Up-and-down, left-and- right ButtonVideo OUT Video signal output connector 22 Y/C OUT Y/C output connectorPower Power indicator lamp This lamp lights when power is supplied to the camera System with up to 8 cameras RM-P2580 System Setting the switches Connecting the control signal cable Setting on the Menu screen When connectingSetting the switches ProceduresMounting the lens Mount the lens according to the procedures described belowDC Iris Video Iris VideoConnections on the back Installing the ferrite core Genlock connection Control signal cablesMounting the camera Fall PreventionSpecified screw M3 ⋅ 6 mm Installation of camera Lens adjustment Level adjustmentDoes not operate Back focus adjustment Back focus adjustmentLens Focus Adjustment Mode With a fixed-focus lensError message display Auto white balance control adjustmentMenu screen is displayed Setting the menuSelected sub-menu screen is displayed Change of the set value displays a change mark ∗Flow of menu screen Menu SettingC SE T T I NGS I S L E VE L Normal AV Erage P EAK Sync Adjust Screen ALC Settings ScreenFunctions and set values Initial value Memo Memo Motion PriorityBLC OFFMode ColourAUX AutoVideo Adjust Screen Mode Select Screen Terminal Motion ZoomMAX Alarm Time Motion Detect ScreenArea Edit Maintenance Screen Factory Settings ScreenCommunication Screen BLC Editting Screen EDIT1 screen is brought upSides having marks can be changed Manual Adjustment of White Balance Screen returns to Mode Select Camera Title SettingThen, the Camera Title screen is brought up Selected character is displayed flashing on and offSetting screen is brought up Setting the Motion Detect FunctionSelect the item Area Edit on Motion Detect screenSet the B&W Item to Auto Output of Black-White/Color switching signalSet the B&W item to AUX B&W/COLOR Mode screen appearsOperation method White spot compensationConfirm that the cursor is at the item CCD Spot screen will be dis- playedDimensions Unit mm SpecificationsVideo OUT OUTTK-C1430 Colour Video Camera