CONNECTION/INSTALLATION
Mounting the camera
Camera mounting screw hole
When mounting the camera on a fixer, pan/ tilt, etc., use the camera mounting screw hole located on the
CAUTION:
Use the screw with a length shorter than 7mm
from a
face.MAX.
7mm
Furthermore, make use of the rotation
Rotation prevention holeprevention hole to prevent the camera from falling and securely mount the camera. Special precautions must be taken for mounting the camera on a wall or a ceiling. We are not liable for any damage caused by improper installation.
6mm
2mm
|
| - |
|
|
DC12V | AC24V | + | POWERISOLATEDONLY (E TYPE) | A |
ONLY(U2CLASSTYPE) | ||||
|
| 2 |
|
|
|
| 1 |
|
|
|
|
|
| - RX+ RX- AUX | GND | |
|
|
| TX+ TX |
| ||
|
|
| C | D |
| |
|
|
| B |
|
|
|
|
|
|
|
| Y/C OUT | |
|
|
|
|
|
| - |
|
|
| OUT |
| SEE INST | |
| IN | VIDEO |
| RUCTION | ||
SYNC |
|
|
| MANUAL | ||
|
|
|
|
| M3 x 6mm | |
POWER |
|
|
|
| ||
Fall Prevention
•Exercise maximum caution when installing the unit to the wall or ceiling. You should not engage in the installation work yourself. Ask a professional to do the job, since the fall of the unit can result in injuries and accidents.
•When installing the unit on a fixer, Pan/ Tilt unit, etc., make sure to install it firmly using a
•To prevent fall, connect the unit to a section with sufficient strength (ceiling slab or channel) using a fall prevention wire such as a wire chain and the like. Use the black screw on the back of the unit for installation.
Pay utmost attention to the length of the wire, too.
•Specified screw (M3 ⋅ 6 mm)
Never use any screw longer than the specified length as the inside can be damaged.