JVC TK-C1430 BLC Editting Screen, EDIT1 screen is brought up, Sides having marks can be changed

Page 36

MENU SETTING

BLC EDITTING Screen

It is possible to set freely the light metering area for backlight compensation. The 2 screens of EDIT1 and EDIT2 can be set.

A L C SE T T I NGS

I R I S L E VE L	NORMAL
AV ERAGE : P EAK	8 : 2
SHUT T ER / E x DR	NORMAL
AGC MODE	2 0 dB
L OL UX MOD E	OF F
SE NSE U P	OF F
PR I OR I T Y	MOT I ON
B L C	EDIT 1

B&W/COLOUR MODE

EDIT 1 screen

MENU button SET button

SET
	CAMERA
AWC	SETUP
AWC
MENU

SET button

EDIT 2 screen

Light metering area

1.Set the item BLC on the ALC SETTING screen to EDIT1.

2.Press the SET button.

The EDIT1 screen is brought up.

3.Set the upper side and left side of the metering area using the

button.

The sides having marks can be changed.

4.Press the SET button.

The changeable sides of the metering area move to the right side and base side.

Light metering area

SET button

*The indicated position on the screen should be used as a rough guide.

5.Set the base and right side of the metering area using the

button.

If the SET button is pressed once more, the two changeable sides of the meter- ing area return to the top and left sides. (The EDIT2 screen can also be set likewise)

6.Upon completion of setting, press the MENU button.

The screen returns to ALC SETTING SCREEN.

*To use the set metering area, set the item BLC to EDIT1 or EDIT2.

E-36

Image 36

Contents TK-C1430 Important Safeguards Page Safety Precautions Contents Features MemoReference page or item Operating Precautions Controls, Connectors and Indicators Lens mountCamera-mounting screw Hole 1/4 inch Rotation-preventive holeVIDEO/DC Iris Selector Switch Cover 12 SET/AWC Set. Auto White ControlButton Iris Iris Terminal15 INT/GL, LL Selector Switch for Synchronizing System DUPLEX, Simplex Selector Switch for Transmission System17 RX.TERM-ON/OFF RX SignalTerminal ON/OFF Switch 13 , , , Up-and-down, left-and- right Button22 Y/C OUT Y/C output connector Video OUT Video signal output connectorPower Power indicator lamp This lamp lights when power is supplied to the cameraRM-P2580 System System with up to 8 cameras Connecting the control signal cable Setting the switches Setting on the Menu screen When connectingProcedures Setting the switchesMount the lens according to the procedures described below Mounting the lensDC Iris Video Iris VideoInstalling the ferrite core Connections on the back Control signal cables Genlock connectionMounting the camera Fall PreventionSpecified screw M3 ⋅ 6 mm Installation of camera Lens adjustment Level adjustmentDoes not operate Back focus adjustment Back focus adjustmentLens Focus Adjustment Mode With a fixed-focus lensAuto white balance control adjustment Error message displaySetting the menu Menu screen is displayedSelected sub-menu screen is displayed Change of the set value displays a change mark ∗Menu Setting Flow of menu screenC SE T T I NGS I S L E VE L Normal AV Erage P EAK Sync Adjust Screen ALC Settings ScreenFunctions and set values Initial value Memo Memo Priority MotionBLC OFFColour ModeAUX AutoVideo Adjust Screen Mode Select Screen Terminal Motion ZoomMAX Alarm Time Motion Detect ScreenArea Edit Maintenance Screen Factory Settings ScreenCommunication Screen BLC Editting Screen EDIT1 screen is brought upSides having marks can be changed Manual Adjustment of White Balance Camera Title Setting Screen returns to Mode SelectThen, the Camera Title screen is brought up Selected character is displayed flashing on and offSetting the Motion Detect Function Setting screen is brought upSelect the item Area Edit on Motion Detect screenOutput of Black-White/Color switching signal Set the B&W Item to AutoB&W/COLOR Mode screen appears Set the B&W item to AUXWhite spot compensation Operation methodConfirm that the cursor is at the item CCD Spot screen will be dis- playedSpecifications Dimensions Unit mmVideo OUT OUTTK-C1430 Colour Video Camera