JVC TK-C1430 manual Memo

Item		Functions and set values	Initial value
SHUTTER	This sets the electronic shutter as well as the ExDR (Extended		NORMAL
/ExDR	Dynamic Range).
	The use of an electronic shutter function enables shooting with
	proper brightness, as more brightness results in higher shutter
	speed.
	The ExDR function allows even the shooting of a subject having
	different luminous flux density by composing a picture shot at 1/
	100 sec. shutter speed with a picture shot by a high-speed
	shutter.
	NORMAL: This fixes the shutter speed to 1/50.
		The ExDR does not function.
	MANUAL: This sets the shutter speed by the item SHUTTER
		SPEED on the SHUTTER screen.
		The ExDR does not function.
		When SENSE UP is functioning, MANUAL cannot be
		selected. (Not displayed on MENU)
	AUTO:	This automatically switches the shutter speed
		according to brightness.
		The ExDR does not function.
		The item FAST LIMIT on the SHUTTER (ExDR) screen
		sets a maximum shutter speed value.
	M.ExDR:	This is used when shooting a subject with difference
		in a luminous flux density in the screen under a fixed
		illumination condition, and so on. During ExDR mode,
		the item M.ExDR.SPEED on the SHUTTER (ExDR)
		screen sets the composing high shutter speed. It is
		possible to set only when the items BLC and SENSE
		UP are OFF. What’s more, the ExDR LEVEL sets
		the signal level of the composing high-speed shutter.
	A.ExDR:	This is used when the subjects having different
		luminous flux densities are continuously used night
		and day in the situation where both indoor and
		outdoor subjects are mixed in existence, and so forth.
		During ExDR mode, the composing shutter speed
		automatically varies according to the contrast of a
		subject. This is set when shooting the subject with
		changing brightness.
		This can be set only when the item BLC is OFF.
		What’s more, the ExDR LEVEL sets the signal level
		of the composing high-speed shutter.

MEMO

•Do not set to A.ExDR when using a manual lens.

•When M.ExDR mode or A.ExDR mode is used, the border between a bright part and a dark part can be coloured (cyan, orange, etc.), but this is not a malfunction.

•When the SHUTTER/ExDR item is set to M.ExDR or A.ExDR, a flicker can occur under a fluorescent lamp, mercury lamp, etc. However, this occurs by principle of the ExDR function, and therefore this is not a malfunction.

*When the SHUTTER (ExDR) item is set to NORMAL, the following items (SHUTTER SPEED, FAST LIMIT, ExDR LEVEL, and M.ExDR SPEED) cannot be changed.

SHUTTER	This sets a shutter speed when MANUAL is set.	1/120
SPEED	The AUTO, M. ExDR, A. ExDR set value is displayed as
	“- - -” and cannot be changed
	[Set values: 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, and
	1/10000]

E-27