CONNECTION/INSTALLATION
Installing the ferrite core
To retain electromagnetic compatibility, use the ferrite cores provided when connecting to the lens.
VIDEO |
DC |
Wind once
Ferrite core
(or
ALC | Av Pk |
LEVEL | L H |
Wire clamp
Notes:
•Install the ferrite cores within 50 mm of the
•If the LENS cable is short, please connect the cable to the camera without winding the cable around the ferrite core.
Connections on the back
Power supply (DC 12 V or AC 24 V)
| + | - |
|
|
|
|
|
| 1 | 2 | ISOLATEDPOWER ONLY |
|
|
|
|
DC12V | AC24V | CLASS2 ONLY(U TYPE) | (E TYPE) |
|
|
| |
|
|
|
| TX+ TX- RX+ RX- AUX GND | |||
|
|
|
| A | B | C | D |
| Y/C OUT |
SYNC IN | VIDEO OUT |
| SEE INST- |
POWER | RUCTION |
MANUAL |
Connect the DC 12 V or the AC 24 V power supply to the DC 12V/AC 24V terminals. To prevent connection errors or a cable disconnection, we recommend the use of lug plates for the connections.
The following table shows the connection distances and connection cables provided that
Maximum extension | 100 m | 260 m | 410 m | 500 m |
(reference) |
|
|
|
|
Conductor | 1.0∅mm | 1.6∅mm | 2.0∅mm | 2.6∅mm |
diameter | and more | and more | and more | and more |
|
|
|
|
|