Editing
Editing onto another tape
You can save the recorded picture and create your own video program by editing with any other h8 mm, HHi8, jVHS, 
DV that has video/audio inputs.
Before editing
Connect the camcorder to the VCR using the supplied A/V connecting cable. Set the input selector on the VCR to LINE, if available.
If your VCR is a stereo type
Connect only the black plug for audio L (left) on the VCR. With this connection, the sound is monaural even in stereo models.
Starting editing
Turn off the speaker of the camcorder while editing. Otherwise, picture distortion may occur.
(1) Insertablanktape(oratapeyouwanttorecordover)intotheVCR.
(2) Playbacktherecordedvideocartridgeonthecamcorderuntilyoulocatethe
pointjustbeforewhereyouwanttostartediting,thenpressPtosetthe
camcorderinplaybackpausemode.
(3) OntheVCR,locatetherecordingstartpointandsettheVCRinrecording
pausemode.
(4) Firstpress Ponthecamcorder,andafterafewsecondspress PontheVCR
whenyouwanttostartediting.
To edit more scenes
Repeat steps 2 to 4.
To stop editing
Press pon both the camcorder and the VCR.