Panasonic PV-L591 Digital Zoom, Digital EIS on, Press D. Zoom, Hold down T on Power Zoom

Digital Zoom

Power Zoom magnification is digitally		Before you begin...
increased.	2	• Connect Camcorder to power source.
		• Set POWER to CAMERA.
		1 Press D. ZOOM.
		Digital Zoom mode (150⋅ maximum).
	T W	The Higher digital magnification levels
		may cause picture distortion.
	1, 3	2 Hold down “T” on POWER ZOOM.
		Digital Zoom starts when normal zoom
		reaches maximum (20⋅).
		• Zoom level appears in EVF or LCD
		monitor.
		• POWER ZOOM switch controls digital
		zoom level.
		• Normal zoom resumes when level falls to
		20⋅.
		3 Press D. ZOOM to turn off Digital Zoom
		so no indication appears.

Digital Electronic Image Stabilization (E.I.S.)

Special

Helps stabilize picture when recording in unstable situations.

1, 2

NORMAL Digital EIS ON

Before you begin...

•Connect Camcorder to power source.

•Set POWER to CAMERA.

1Press EIS to display “EIS” in the EVF or LCD monitor.

•Image becomes slightly enlarged and shutter speed auto-adjusts from 1/80 to 1/350 according to brightness.

•Use High Speed Shutter (page 24) if needed. Shutter speed setting remains after EIS is canceled.

2Press EIS again to cancel when not in use.

E.I.S. may not function during...

•extreme Camcorder movement.

•recording of subjects with distinct horizontal or vertical stripes.

•low light situations (EIS indicator flashes).

•intense fluorescent lighting situations.

•recording of very fast motion.

Features

27