Panasonic AW-E560 manual Connection of a Remote Control BOX RCB

Page 20

■CONNECTION OF A REMOTE CONTROL BOX (RCB)

The RCB (WV-CB700A) and the camera must be connect- ed with the optional conversion cable WV-CA20T10.

1.Turn RCB power off before connecting cables.

2.Connect the 20 pin connector of the conversion cable to REMOTE connector of the camera. The 10-pin con- nector must be connected to the RCB accessory cable or an optional RCB cable.

PAGE ITEM	UP	DOWN	IRIS
(AWC)	(ABC)	(BAR)

3.Turn RCB power on and the camera can be remote controlled by the RCB.

NOTES:

•The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommended that the signals from the monitor output be used for moni- toring purpose only.

•No gen-lock signal is available from the RCB.

G/L IN	VIDEO OUT
	ZOOM/FOCUS
VBS/HD	VD
75 ¶	VIDEO/RGB
ON

REMOTE

OFF

CONTROL

Conversion cable WV-CA20T10 (Option) (3 ft/ 1m)

The RCB accessory cable, WV-CA10B25 (80 ft/25 m) or WV-CA10B50 (160 ft/50 m).

CAUTION

CONNECT TO SPECIFIED

CLASS 2 POWER SUPPLY EXT DC IN

SEE MANUAL ONLY SEE MANUAL

Video signals

Conversion Cable WV-CA4C4P

or

Power Cable (locally purchased)

Cautions

1.Connect this to a 12V DC class 2 power supply only.

2.To prevent fire or shock hazard, the UL listed wire VW-1, style 1007 should be used as for the cable for 12V DC Input Connector.

To AG-B640 or AU-B110

Power supply:	USER SET		WV-CB700A
	ALL	1

12 V DC, 2A min.

RCB, Rear view

-18-

Image 20

Contents AW-E560 Lightning flash with arrowhead sym Contents AGC FeaturesPreface Special Notes on Operation Precautions DontsPage Major Operating Controls and Their Functions Top View Bottom View Front ViewSwitch Item Switch ITEM/AWCUp Switch UP/ABC Down Switch DOWN/BARZoom/Focus Connector ZOOM/FOCUS Video Output Connector Video OUTIris Connector Iris DC Input Connector EXT DC Remote Connector RemotePower Indicator Video/RGB Output Connector VIDEO/RGB Control Connector Control15. G/L Signal 75-ohm ON/OFF Switch 75Ω ON/OFF Lens MountingFlange Back Adjustment Iris Gain Control in a LensConnection of Device with a Composite Input Connector ConnectionsHow to assemble the power cable Connector pin layoutWires Connection of a Remote Controller RCU and a Studio Cable Multiplex adaptor WV-PS550 Connection of a Remote Control BOX RCB Connection with Multiple Cameras PC Mode System Connection of Computer Interface AdaptorConnection Procedures for Cable KIT WV-CA28T10 CA20TBNCDC12V CA28T103 Connection Procedure Page Adjustment Color temperature and adjustment of white balanceAdjustment with the RCU RCB Automatic Tracking White Balance Setting ATW Manual White Balance SettingReset to 3200K or 5600K White Balance Black Balance Adjustment Adjustment by CameraAdjustment with RCU or RCB Total Pedestal Level AdjustmentGEN-LOCK Adjustment Horizontal Phase ControlColor Phase Adjustment Phase Coarse Fine RET ENDSettings Operation Mode SettingOperation Mode Setting CURRMODE1/SCENE1 SCENE2 SCENE3 User a User B Menu Item Setting Setup MemorySetup State Setup Data Screen Camera AloneIris Control Setting Iris MANU, Auto Scene 2 Scene Initial SET Menu Setting How to Read ScreensHow to Set Initial Set MemoryInitial Set State Initial Set ScreenCamera Alone RCU RCBRed gain adjustment R Gain Blue gain adjustment B Gain Total Pedestal Adjustment T PED2Painting Setting Painting ON/OFF 3AUTO IRIS/AGC/ELC Level Adjustment LevelOFF Auto Iris ADJ ON/ADJ OFFFrame @5Output Signal Setting @6Output Signal Setting 2 Output SEL2 Y/C, Composite@8Camera ID on/off setting Camera ID ON/OFF @9Time Date on/off setting Time Date ON/OFFSETUP/INITIAL Set Memory Reset User Setup Menu Setting User SettingScene File Memory User Set ScreensCamera Alone Camera with RCU RCB #1Knee Compensation Level Setting Knee Point 88% to 98% #2White Clip Level Setting White Clip 95% to 110%#4Detail Band Level Setting DTL Band 1 to #5Noise Suppress Compensation Level Setting Noise SUP 0 toGammanor User Set Memory Reset YES UP SW No Down SW NOW Reset User a MemoryCamera Installation Camera ID Camera ID SettingCamera ID Setting UP SW ← → Down SW Item SW Camera ID Position Set Screen Camera ID Display Position SettingCamera ID Display Position Time/Date Set Screen Camera Alone TIME/DATE SettingTime/Date Setting Time/Date Display Position Time/Date Display Position SettingTime/Date Display Position Set Screen Range of SETUP/INITIAL SET and Their Initial Values Iris Auto Manu Setup Menu Shutter OFF ELC White BALPurpose Indoor AGC High AGC LOWRange of Scene FILE/USER SET and Their Initial Values Scene User a User BGamma NOR Gamma SHT Knee Point White Clip Flare RSCENE/USER File and Their Initial Value MODE2 SCENE/USER File Initial Value MODE3 SCENE/USER File and Their Initial Value MODE4 Specifications NtscVBS, BB, HD, VD AUTO, ELCStandard Accessories Optional AccessoriesWV-RC700A WV-CB700AN1097-0 7J1A095A