OPERATION MODE SETTING
• Operation Mode Setting
The camera has three memories, including the setup mem- ory, initial set memory and scene file memory, and various functions for four operation modes, are preset in the facto- ry.
Functions can be set as best suited to each operation mode.
MODE 1: For shooting mainly indoors
MODE 2: For monitoring indoors and outdoors
MODE 3: For microscopic shooting
MODE 4: For video processing and telop shooting
• Settings
1.When power is turned on the camera, the operation mode selection as shown on the right figure appears on the monitor screen.
2.One of the operation modes appears blinking and changes each time the item switch is pressed.
3.Press the page switch to select the desired mode while it is blinking.
NOTE:
Please refer SETUP/INITIAL SET AND THEIR INITIAL VALUE TABLE for the details.
CURR:MODE1/SCENE1
MODE1