Panasonic AW-E560 manual How to Read Screens, UP SW ← → Down SW Item SW

■How to Read Screens

Cursor

Characters that can be set

** CAMERA ID **

ABCDEFGHIJKLM NOPQRSTUVWXYZ 0123456789

().,'":;&#!?= +-*/%$←→

Item switch: To move the cursor 1 line down

Up switch: To move the cursor 1 position left

Down switch: To move the cursor 1 position right

UP SW ← → DOWN SW

↓

ITEM SW

(2) To enter a character for camera ID, press the page

switch when the cursor is on the desired character.

Command

Set characters

(". " indicates a space.)

←→ SPACE

POSI RET END RESET

AW-E560.........

Cursor (blinking) indicates next character position.

	The character is set, and is shown on the bottom line
	of the screen.
(3)	If the page switch is pressed when the cursor is at ←,
	the cursor moves from the set character to one posi-
	tion left.
(4)	If the page switch is pressed when the cursor is at →,
	the cursor moves from the set character to one posi-
	tion right.
(5)	If the page switch is pressed when the cursor is at
	SPACE, a blank is left.
(6)	If the page switch is pressed when the cursor is at

■Camera ID Setting

(1)Display the page No.5 of the INITIAL SET menu.

(2)Move the cursor to CAMERA ID, and press the page switch for more than 2 seconds to display the camera ID setting mode.

■How to Set

(1)Move the cursor (blinking) using the item switch, Up switch, or Down switch, and select characters or a command to set.

	POSI, camera ID display position is ready to be set.
(7)	If the page switch is pressed when the cursor is at
	RESET, all the set characters are erased.
(8)	To return to the INITIAL SET menu state, move the cur-
	sor to RET and press the page switch.
(9)	To return to the normal state, do the following steps.
	If the camera is used alone, move the cursor to END,
	and press the page switch.
	If the camera is used with an RCU (RCB), set the user
	set switch to OFF.

-50-