Panasonic AW-E560 Initial SET Menu Setting, How to Read Screens, How to Set, Initial Set Memory

■How to Read Screens

Set parameter

** SETUP **

GAIN		AGC HIGH	Cursor (blinking)
IRIS		AUTO
SHUTTER		OFF
WHITE	BAL	ATW
DTL LEVEL		LOW
SCENE	FILE	USER A
INIT	USER	END

To return to normal state (camera alone)

To enter user set state

To enter initial set state

■How to Set

(1)The cursor (blinking) moves each time the item switch is pressed. The item indicated by the cursor can be reset or its command can be executed.

(2)Use the Up and Down switches to change settings.

(3)When the page switch is pressed after moving the cursor to INIT, the INITIAL SET menu will displayed.

(4)When the page switch is pressed after moving the cursor to USER, the camera is ready for user setting.

(5)To terminate camera setup, move the cursor to END, and press the page switch.

If the camera is used with an RCU (RCB), set the user set switch to OFF.

The camera will then operate according to the set- tings.

INITIAL SET MENU SETTING

■Initial Set Memory

The AW-E560 has an initial set memory, which stores data on the states of the individual functions of the camera pre- set before shipment from the factory.

Camera operating conditions can be set using the initial set function.

The camera has a memory for each mode.

-36-