When the mode is set to ELC, the electronic shutter may not function if the iris is set to AUTO in the SETUP menu and the lens iris switch to M (manual). Make sure that the camera and lens settings are the same. If ELC is selected, flicker may increase under fluores- cent lights.
4White Balance Setting [WHITE BAL: ATW, A CH, B CH, MANU, P SET 3.2K, P SET 5.6K]
When the mode is set to ATW, white balance is auto- matically adjusted at all times.
When the mode is set to A CH or B CH, with SETUP menu OFF, white balance is automatically adjusted with the AWC switch on the back of the camera. Color temperature conditions of two scenes can be stored in the A CH/B CH memories. When the painting mode is ON, fine color adjustment can be made by red/blue gain setting of INITIAL SET menu after AWC.
When the mode is set to MANU, white balance can be adjusted by red/blue gain setting of INITIAL SET menu.
When the mode is set to P SET 3.2K, white balance is adjusted to 3200K illumination.
When the mode is set to P SET 5.6K, white balance is adjusted to 5600K illumination.
Note:
When the camera is used with an RCU (RCB), the switch cannot be set to MANU, P SET 3.2K, or P SET 5.6K.
5Detail Level Setting [DTL LEVEL: OFF, LOW, HIGH] Use this mode to select any of three detail levels as desired: HIGH, LOW, OFF.
*Low or high level ranges can be set by using a USER SET menu.
6Scene File Selection Setting [SCENE FILE: 1, 2, 3,
USER A, USER B] Mode 1:
USER A/B
SCENE 2: SCENE 3:
Mode 2:
USER A/B
SCENE 2: SCENE 3:
Mode 3:
USER A/B
SCENE 2: SCENE 3:
Mode 4:
USER A/B
SCENE 2: SCENE 3:
*USER A and B have a memory for each operation mode (8 in total).