Panasonic AW-E560 manual Preface, Features, Agc

Page 4

PREFACE

The Panasonic AW-E560 is a digital signal processing color video camera that incorporates three 1/2” CCDs. A digital video signal processing system is packed in a com- pact, lightweight body while assuring high picture quality, high reliability and high performance.

System setup and adjustments can be easily performed by setup menu.

Connection to peripheral devices, such as an RCU and an RCB, enables a wide variation of system configurations. The lens and the camera pan/tilt unit can be remote con- trolled when the camera is connected to an RCU with optional multiplex adaptor WV-PS550.

Connection to an RCU for camera control and power sup- ply can be simply done with a coaxial cable through an optional adaptor.

FEATURES

1.Digital video signal processing for high quality, high reliability, high performance, lightweight and compact size.

2.Resolution: 800 lines (HIGH BAND DTL : ON), S/N

ratio: 62dB

3.Minimum illumination: 5 lux (F1.4, +18dB)

4.SET UP menu for system check and readjustments.

5.Built-in automatic controls, including ATW, ELC, and

AGC

6.CCD readout is switchable between field and frame modes. Vertical resolution can be stepped up in frame mode and it is effective for shooting still objects.

7.Any of R/G/B, Y/C, Y/PB/PR and composite can be selected as an output signal.

8.Thanks to the built-in synchronized scanning system, noiseless pictures are available from computer graph- ics.

9.Various correction circuits permit video reproduction with highest fidelity.

10.Chroma aperture correction enables clear shots of dark color objects.

11.2 Dimensional lowpass filter reduces spurious signals.

12.A dark detail circuit provides natural edge correction to any object in a dark scene.

-2-

Image 4

Contents AW-E560 Lightning flash with arrowhead sym Contents Preface FeaturesAGC Special Notes on Operation Precautions DontsPage Major Operating Controls and Their Functions Top View Bottom View Front ViewSwitch Item Switch ITEM/AWCUp Switch UP/ABC Down Switch DOWN/BARIris Connector Iris Video Output Connector Video OUTZoom/Focus Connector ZOOM/FOCUS Power Indicator Remote Connector RemoteDC Input Connector EXT DC Video/RGB Output Connector VIDEO/RGB Control Connector Control15. G/L Signal 75-ohm ON/OFF Switch 75Ω ON/OFF Lens MountingFlange Back Adjustment Iris Gain Control in a LensConnection of Device with a Composite Input Connector ConnectionsHow to assemble the power cable Connector pin layoutWires Connection of a Remote Controller RCU and a Studio Cable Multiplex adaptor WV-PS550 Connection of a Remote Control BOX RCB Connection with Multiple Cameras PC Mode System Connection of Computer Interface AdaptorConnection Procedures for Cable KIT WV-CA28T10 CA20TBNCDC12V CA28T103 Connection Procedure Page Adjustment Color temperature and adjustment of white balanceAdjustment with the RCU RCB Automatic Tracking White Balance Setting ATW Manual White Balance SettingReset to 3200K or 5600K White Balance Black Balance Adjustment Adjustment by CameraAdjustment with RCU or RCB Total Pedestal Level AdjustmentGEN-LOCK Adjustment Horizontal Phase ControlColor Phase Adjustment Phase Coarse Fine RET ENDOperation Mode Setting Operation Mode SettingSettings CURRMODE1/SCENE1 SCENE2 SCENE3 User a User B Menu Item Setting Setup MemorySetup State Setup Data Screen Camera AloneIris Control Setting Iris MANU, Auto Scene 2 Scene Initial SET Menu Setting How to Read ScreensHow to Set Initial Set MemoryInitial Set State Initial Set ScreenCamera Alone RCU RCBRed gain adjustment R Gain Blue gain adjustment B Gain Total Pedestal Adjustment T PED2Painting Setting Painting ON/OFF 3AUTO IRIS/AGC/ELC Level Adjustment LevelFrame Auto Iris ADJ ON/ADJ OFFOFF @5Output Signal Setting @6Output Signal Setting 2 Output SEL2 Y/C, Composite@8Camera ID on/off setting Camera ID ON/OFF @9Time Date on/off setting Time Date ON/OFFSETUP/INITIAL Set Memory Reset User Setup Menu Setting User SettingScene File Memory User Set ScreensCamera Alone Camera with RCU RCB #1Knee Compensation Level Setting Knee Point 88% to 98% #2White Clip Level Setting White Clip 95% to 110%#4Detail Band Level Setting DTL Band 1 to #5Noise Suppress Compensation Level Setting Noise SUP 0 toGammanor User Set Memory Reset YES UP SW No Down SW NOW Reset User a MemoryCamera Installation Camera ID Setting Camera ID SettingCamera ID UP SW ← → Down SW Item SW Camera ID Display Position Camera ID Display Position SettingCamera ID Position Set Screen Time/Date Setting TIME/DATE SettingTime/Date Set Screen Camera Alone Time/Date Display Position Set Screen Time/Date Display Position SettingTime/Date Display Position Range of SETUP/INITIAL SET and Their Initial Values Iris Auto Manu Setup Menu Shutter OFF ELC White BALPurpose Indoor AGC High AGC LOWRange of Scene FILE/USER SET and Their Initial Values Scene User a User BGamma NOR Gamma SHT Knee Point White Clip Flare RSCENE/USER File and Their Initial Value MODE2 SCENE/USER File Initial Value MODE3 SCENE/USER File and Their Initial Value MODE4 Specifications NtscVBS, BB, HD, VD AUTO, ELCStandard Accessories Optional AccessoriesWV-RC700A WV-CB700AN1097-0 7J1A095A