Panasonic AK-HC1500G How to set the lens, Iris control cable to Iris connector

Page 13

How to install Be sure to ask the dealer for the installation, adjustment and connection of this equipment.

How to set the lens

Standard 2/3” bayonet type (B4 mount) lens of any makers can be used*.

 Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.

Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the lens.

Connect the iris control cable to the IRIS connector.

Connect the zoom/focus control cable to the ZOOM/FOCUS connector.

* Note that there are some lenses uncontrollable with respect to zoom, focus function.

ENGLISH

Iris control cable (to IRIS connector)

Zoom/focus control cable (to ZOOM/FOCUS connector) (When a pan/tilt head is used, connect the cable

to the pan/tilt head.)

Lens fixing ring knob

Attach the provided filter to the iris control cable and zoom/focus control cable.

Filter

How to install on the camera housing, pan/tilt head, tripod, etc.

Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using the camera set-screw hole (1/4-20UNC, 3/8-16UNC).

When mounting the camera on a pan/tilt head, be sure to use proper tools and make sure that there is no fear of falling off.

- 12 (E) -

Image 13

Contents Multi Purpose Camera AK-HC1500GFCC Note English VersionEnglish Important Safety Instructions For business users in the European Union Accessories ContentsIntroduction Characteristics Cooling fan Precautions for useBottom view Rear view Front viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT Iris control cable to Iris connector How to set the lensConfiguration example 1 Connection of camera controller How to set up the systemConfiguration example 2 High-Speed P/T system Adjust the white balance Operation procedureAdjust the black balance Start shootingFlange back adjustment for zoom lens How to adjustLens iris gain volume adjustment Auto iris power zoom lensColor temperature and white balance adjustment reference White balance adjustmentGen-lock adjustment Black balance adjustmentHow to display the menus Setting of menu items Using AK-HRP150G camera controller TOP menuBlack Shading  Maintenance menuDetection READY, Active Correctdig OFF, onGamma PEDESTAL, GammaBlack Gamma OFF, on Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare 000 to FlareFlare OFF, on Knee Point KNEE, White Clip80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%Knee Level 100% to 109% Knee Point 80.00% to 107.00%White Clip LVL 90% to 109% Knee OFF, MANUAL, Auto B GainWhite Clip OFF, on High Color OFF, onDetail OFF, on DetailKnee Aperture OFF, on Detail Source Slim Detail OFF, onSkin Tone DTL OFF, on Skin Tone DetailSkin GET OFF, on GAIN, Auto Iris Iris Mode LENS, CAMIris Level 0 to Iris PEAK/AVE 0 toSuper Gain Mode S.GAIN1, S.GAIN2, S.GAIN335 to 0.75 DRS OFF -10 to +10 DRS on Peak Frequency 0 toPED Offset -200 to +200 Frame Rate Range 60-6 Frame ModeFrame Rate 60 to Matrix Table A, B MatrixColor Correction Mode  Setting menuGain Select LOW, MID, HIGH, S.GAIN1 toColor Correction OFF, on Matrix Table OFF, A, BDigital Extender OFF, on BAR SELStatus OFF, on FormatAWB Active AWB OKOUT Range RGB ABB OKMenu on BAR OFF, on FAN OFF, AUTO, onShutter Speed ShutterSynchro Scan PIX Defect GEN-LOCKGEN-LOCK Input BNC, Dsub Auto DetectionProtocol 1 to Protocol Camera ID menu  File Operation menu Mode LOAD/STORELOAD/STORE from ExecutePreset Reset Time Code menu Menu list 47 E 48 E Unit inch mm AppearanceInput/output signal SpecificationsControl cable for information camera Appendix