Panasonic AK-HC1500G operating instructions Specifications, Input/output signal

Page 51

Specifications

Source voltage:

12 V DC

 

 

 

Power consumption:

17 W

 

 

indicates safety information.

 

 

 

 

 

 

Image pickup device:

 

2/3” 1 million-pixel IT, CCD3

System:

GBR image pickup system

Resolving optical system: F1.4 prism

Optical filter:

ND; CLEAR, 1/4, 1/16, 1/64

Lens mount:

Bayonet type

Output format:

1080: 60i/59.94i/50i/30psF/29.97psF/25psF/24psF/

 

23.98psF

 

720: 60p/59.94p/50p

Sensitivity:

F10, 2000Ix, 3200K, white reflection rate 89.9%

S/N:

54 dB

Ambient operating temperature:

 

+32°F to +104°F (0°C to +40°C)

Storage temperature:

–4°F to +140°F (–20°C to +60°C)

Weight:

Approx. 3.3 lbs. (1.5 kg)

Dimensions (WHD):

3-9/16”4-5/8”6-5/16” (90117160 mm)

 

(excluding protrusions)

Input/output signal

Video output:

HD SDI (BNC 1 system)

SYNC input:

SYNC input (GL input 3 value SYNC/BB)

Camera connector:

D-SUB 15-pin connector seat (JAE: Do2-M15SAG-20L9E)

Control system:

Synchronous (EIA-422)

Lens connector 1:

Iris control (HIROSE: HR10A-10R12SC)

Lens connector 2:

Zoom, focus control (HIROSE: HR10A-10R12PC)

ENGLISH

Weight and dimensions shown are approximate. Specifications are subject to change without notice.

- 50 (E) -

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Multi Purpose Camera AK-HC1500GFCC Note English VersionEnglish Important Safety Instructions For business users in the European Union Accessories ContentsIntroduction Characteristics Cooling fan Precautions for useBottom view Rear view Front viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT Iris control cable to Iris connector How to set the lensConfiguration example 1 Connection of camera controller How to set up the systemConfiguration example 2 High-Speed P/T system Start shooting Operation procedureAdjust the white balance Adjust the black balanceAuto iris power zoom lens How to adjustFlange back adjustment for zoom lens Lens iris gain volume adjustmentColor temperature and white balance adjustment reference White balance adjustmentGen-lock adjustment Black balance adjustmentTOP menu Setting of menu itemsHow to display the menus  Using AK-HRP150G camera controllerCorrectdig OFF, on  Maintenance menuBlack Shading Detection READY, ActiveGamma PEDESTAL, GammaCine Gamma Select Video REC, Film REC Gamma OFF, onBlack Gamma OFF, on DRS OFF, onFlare Flare 000 toFlare OFF, on Knee Point -25.00% to +25.00% KNEE, White ClipKnee Point 80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO RECKnee Point 80.00% to 107.00% Knee Level 100% to 109%White Clip LVL 90% to 109% High Color OFF, on B GainKnee OFF, MANUAL, Auto White Clip OFF, onDetail Detail OFF, onKnee Aperture OFF, on Detail Source Slim Detail OFF, onSkin Tone Detail Skin Tone DTL OFF, onSkin GET OFF, on Iris PEAK/AVE 0 to Iris Mode LENS, CAMGAIN, Auto Iris Iris Level 0 toSuper Gain Mode S.GAIN1, S.GAIN2, S.GAIN3Peak Frequency 0 to 35 to 0.75 DRS OFF -10 to +10 DRS onPED Offset -200 to +200 Frame Mode Frame Rate Range 60-6Frame Rate 60 to Matrix Table A, B MatrixColor Correction LOW, MID, HIGH, S.GAIN1 to  Setting menuMode Gain SelectBAR SEL Matrix Table OFF, A, BColor Correction OFF, on Digital Extender OFF, onAWB OK FormatStatus OFF, on AWB ActiveFAN OFF, AUTO, on ABB OKOUT Range RGB Menu on BAR OFF, onShutter Shutter SpeedSynchro Scan Auto Detection GEN-LOCKPIX Defect GEN-LOCK Input BNC, DsubProtocol 1 to Protocol Camera ID menu Execute Mode LOAD/STORE File Operation menu LOAD/STORE fromReset Preset Time Code menu Menu list 47 E 48 E Unit inch mm AppearanceInput/output signal SpecificationsControl cable for information camera Appendix
Top Page Image Contents