Panasonic AK-HC1500G KNEE, White Clip, Knee Point -25.00% to +25.00%, Knee Slope

Page 25

Setting of menu items

ENGLISH

MAINTENANCE menu

[4]KNEE, WHITE CLIP

�� KNEE,WHITE CLIP(1/2) ��

M KNEE POINT	:95.00%
R KNEE POINT	:+00.00%
B KNEE POINT	:+00.00%
M KNEE SLOPE	:50
R KNEE SLOPE	:+00
B KNEE SLOPE	:+00
A.KNEE POINT	:95.00%
A.KNEE LEVEL	:108%

M WHITE CLIP LVL :109%

R WHITE CLIP LVL :+00%

B WHITE CLIP LVL :+00%

M KNEE POINT

[80.00% to 107.00% (VIDEO MENU)]

[30% to 90% (FILM MENU/VIDEO REC)]

For adjusting the knee point.

R KNEE POINT [–25.00% to +25.00%]

For correcting the knee point of the red in relation to the master knee point.

B KNEE POINT [–25.00% to +25.00%] For correcting the knee point of the blue in relation to the master knee point.

M KNEE SLOPE

[00 to 99 (VIDEO MENU)]

[150% to 600% (FILM MENU)] For adjusting the knee slope.

R KNEE SLOPE [–99 to +99]

For adjusting the knee slope of the red in relation to the master knee slope.

B KNEE SLOPE [–99 to +99]

For adjusting the knee slope of the blue in relation to the master knee slope.

The M KNEE POINT and M KNEE SLOPE settings do not take effect when a setting other than MANUAL is selected for KNEE or ON is selected as the DRS setting when the VIDEO MENU has been selected or when FILM REC is selected as the CINE GAMMA SEL setting when the FILM MENU has been selected.

Similarly, the R/B KNEE POINT and R/B KNEE SLOPE settings do not take effect when a setting other than MANUAL is selected for KNEE or ON is selected as the DRS setting when the VIDEO MENU has been selected or when the FILM MENU has been selected.

- 24 (E) -

Image 25

Contents Multi Purpose Camera AK-HC1500GFCC Note English VersionEnglish Important Safety Instructions For business users in the European Union Accessories ContentsIntroduction Characteristics Cooling fan Precautions for useBottom view Rear view Front viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT Iris control cable to Iris connector How to set the lensConfiguration example 1 Connection of camera controller How to set up the systemConfiguration example 2 High-Speed P/T system Adjust the white balance Operation procedureAdjust the black balance Start shootingFlange back adjustment for zoom lens How to adjustLens iris gain volume adjustment Auto iris power zoom lensColor temperature and white balance adjustment reference White balance adjustmentGen-lock adjustment Black balance adjustmentHow to display the menus Setting of menu items Using AK-HRP150G camera controller TOP menuBlack Shading  Maintenance menuDetection READY, Active Correctdig OFF, onGamma PEDESTAL, GammaBlack Gamma OFF, on Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare 000 to FlareFlare OFF, on Knee Point KNEE, White Clip80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%Knee Level 100% to 109% Knee Point 80.00% to 107.00%White Clip LVL 90% to 109% Knee OFF, MANUAL, Auto B GainWhite Clip OFF, on High Color OFF, onDetail OFF, on DetailKnee Aperture OFF, on Detail Source Slim Detail OFF, onSkin Tone DTL OFF, on Skin Tone DetailSkin GET OFF, on GAIN, Auto Iris Iris Mode LENS, CAMIris Level 0 to Iris PEAK/AVE 0 toSuper Gain Mode S.GAIN1, S.GAIN2, S.GAIN335 to 0.75 DRS OFF -10 to +10 DRS on Peak Frequency 0 toPED Offset -200 to +200 Frame Rate Range 60-6 Frame ModeFrame Rate 60 to Matrix Table A, B MatrixColor Correction Mode  Setting menuGain Select LOW, MID, HIGH, S.GAIN1 toColor Correction OFF, on Matrix Table OFF, A, BDigital Extender OFF, on BAR SELStatus OFF, on FormatAWB Active AWB OKOUT Range RGB ABB OKMenu on BAR OFF, on FAN OFF, AUTO, onShutter Speed ShutterSynchro Scan PIX Defect GEN-LOCKGEN-LOCK Input BNC, Dsub Auto DetectionProtocol 1 to Protocol Camera ID menu  File Operation menu Mode LOAD/STORELOAD/STORE from ExecutePreset Reset Time Code menu Menu list 47 E 48 E Unit inch mm AppearanceInput/output signal SpecificationsControl cable for information camera Appendix