Panasonic AK-HC1500G operating instructions  Tally output connector Tally OUT

Page 12

Major operating controls and their functions

Tally output connector [TALLY OUT]

The R tally and G tally signals are output from this connector.

These signals take effect when the optional card for studio applications has been inserted.

Pin No.	Signal
1	GND
2	R_TALLY_OUT
3	G_TALLY_OUT
4	+12 V (500 mA Max)

IRIS connector [IRIS]

Used to connect the IRIS control cables of the lens.

Pin No.	Signal	Pin No.	Signal
1	Return control	7	Iris follow
2	VTR-S/S	8	Iris auto selection
3	UNREG GND	9	—
4	Iris manual selection	10	Zoom position information
5	Iris control	11	Focus position information
6	UNREG 12 V	12	NC

Zoom/Focus connector [ZOOM/FOCUS]

Used to connect the zoom/focus control cables of lens.

Pin No.	Signal	Pin No.	Signal
1	Focus control selection	7	COM
2	Zoom control selection	8	Focus control
3	GND	9	Zoom control
4	Forcible iris closing	10	Iris control selection
5	Iris control	11	COM +Voltage
6	+Voltage	12	COM –Voltage

Operate indicator

Green LED lamp lights to indicate that the specified DC power is supplied to the DC 12 V input connector .

When the video format is changed, the operate LED flashes twice when the format is 720/60p and once with any other format.

DC 12 V input connector [DC12V IN]

12 V DC is supplied through the optional DC power supply cable (AW-CA4T1).

- 11 (E) -

Image 12

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Operation procedure Adjust the white balanceAdjust the black balance Start shootingHow to adjust Flange back adjustment for zoom lensLens iris gain volume adjustment Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustmentSetting of menu items How to display the menus Using AK-HRP150G camera controller TOP menu Maintenance menu Black ShadingDetection READY, Active Correctdig OFF, onPEDESTAL, Gamma GammaGamma OFF, on Black Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare Flare 000 toFlare OFF, on KNEE, White Clip Knee Point80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%Knee Point 80.00% to 107.00% Knee Level 100% to 109%White Clip LVL 90% to 109% B Gain Knee OFF, MANUAL, AutoWhite Clip OFF, on High Color OFF, onDetail Detail OFF, onKnee Aperture OFF, on Slim Detail OFF, on Detail SourceSkin Tone Detail Skin Tone DTL OFF, onSkin GET OFF, on Iris Mode LENS, CAM GAIN, Auto IrisIris Level 0 to Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super GainPeak Frequency 0 to 35 to 0.75 DRS OFF -10 to +10 DRS onPED Offset -200 to +200 Frame Mode Frame Rate Range 60-6Frame Rate 60 to Matrix Matrix Table A, BColor Correction  Setting menu ModeGain Select LOW, MID, HIGH, S.GAIN1 toMatrix Table OFF, A, B Color Correction OFF, onDigital Extender OFF, on BAR SELFormat Status OFF, onAWB Active AWB OKABB OK OUT Range RGBMenu on BAR OFF, on FAN OFF, AUTO, onShutter Shutter SpeedSynchro Scan GEN-LOCK PIX DefectGEN-LOCK Input BNC, Dsub Auto DetectionProtocol Protocol 1 to Camera ID menu Mode LOAD/STORE  File Operation menuLOAD/STORE from ExecuteReset Preset Time Code menu Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera