Panasonic AK-HC1500G operating instructions Super Gain, Mode S.GAIN1, S.GAIN2, S.GAIN3

Page 32

Setting of menu items

MAINTENANCE menu

[9]SUPER GAIN

��S.GAIN(1/2) �� S.GAIN1

MODE	:S.GAIN1
TOTAL GAIN	:42dB
�GAIN	:30dB
PIX MIX	:+6dB
V MIX	:+6dB
FRAME MIX	:OFF
H DETAIL LEVEL	:1
CRISP	:00
LEVEL DEPENDENT	:5
PEAK FREQUENCY	:2

These settings are performed when S.GAIN1, S.GAIN2 or S.GAIN3 has been selected by

GAIN SELECT.

MODE [S.GAIN1, S.GAIN2, S.GAIN3]

For selecting the S.GAIN storage table.

TOTAL GAIN [0 dB to 72 dB]

For displaying the total gain for GAIN, PIX MIX, V MIX and FRAME MIX.

GAIN [0 dB to 36 dB]

For setting the gain increase.

PIX MIX [OFF, +6 dB]

For setting the addition of horizontal pixels ON or OFF.

V MIX [OFF, +6 dB]

For setting the addition of vertical pixels ON or OFF.

FRAME MIX [OFF, +6 dB to +24 dB] For setting the gain increase based on accumulation in the CCD image sensor. This setting does not take effect when MENU SEL is set to FILM MENU and the 720/60p or 720/59.94p is selected as the FORMAT setting.

H DETAIL LEVEL [00 to 63]

For setting the H DETAIL level.

CRISP [00 to 31]

For setting the noise elimination level of the detail signals.

- 31 (E) -

Image 32

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Operation procedure Adjust the white balanceAdjust the black balance Start shootingHow to adjust Flange back adjustment for zoom lensLens iris gain volume adjustment Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustmentSetting of menu items How to display the menus Using AK-HRP150G camera controller TOP menu Maintenance menu Black ShadingDetection READY, Active Correctdig OFF, onPEDESTAL, Gamma GammaGamma OFF, on Black Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare OFF, on FlareFlare 000 to KNEE, White Clip Knee Point80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%White Clip LVL 90% to 109% Knee Point 80.00% to 107.00%Knee Level 100% to 109% B Gain Knee OFF, MANUAL, AutoWhite Clip OFF, on High Color OFF, onKnee Aperture OFF, on DetailDetail OFF, on Slim Detail OFF, on Detail SourceSkin GET OFF, on Skin Tone DetailSkin Tone DTL OFF, on Iris Mode LENS, CAM GAIN, Auto IrisIris Level 0 to Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super GainPED Offset -200 to +200 Peak Frequency 0 to35 to 0.75 DRS OFF -10 to +10 DRS on Frame Rate 60 to Frame ModeFrame Rate Range 60-6 Matrix Matrix Table A, BColor Correction  Setting menu ModeGain Select LOW, MID, HIGH, S.GAIN1 toMatrix Table OFF, A, B Color Correction OFF, onDigital Extender OFF, on BAR SELFormat Status OFF, onAWB Active AWB OKABB OK OUT Range RGBMenu on BAR OFF, on FAN OFF, AUTO, onSynchro Scan ShutterShutter Speed GEN-LOCK PIX DefectGEN-LOCK Input BNC, Dsub Auto DetectionProtocol Protocol 1 to Camera ID menu Mode LOAD/STORE  File Operation menuLOAD/STORE from Execute Time Code menu ResetPreset Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera