Panasonic AK-HC1500G operating instructions Knee Point 80.00% to 107.00%, Knee Level 100% to 109%

Page 26

Setting of menu items

MAINTENANCE menu

[4]KNEE, WHITE CLIP

�� KNEE,WHITE CLIP(1/2) ��

M KNEE POINT	:95.00%
R KNEE POINT	:+00.00%
B KNEE POINT	:+00.00%
M KNEE SLOPE	:50
R KNEE SLOPE	:+00
B KNEE SLOPE	:+00
A.KNEE POINT	:95.00%
A.KNEE LEVEL	:108%

M WHITE CLIP LVL :109%

R WHITE CLIP LVL :+00%

B WHITE CLIP LVL :+00%

A. KNEE POINT [80.00% to 107.00%]

For setting the auto knee break point position. This setting does not take effect when a setting other than AUTO is selected for KNEE or

ON is selected as the DRS setting when the VIDEO MENU has been selected or when the FILM MENU has been selected.

A. KNEE LEVEL [100% to 109%]

For setting the maximum level of auto knee. This setting does not take effect when a setting other than AUTO is selected for KNEE or

ON is selected as the DRS setting when the VIDEO MENU has been selected or when the FILM MENU has been selected.

M WHITE CLIP LVL [90% to 109%]

For setting the white clip level.

R WHITE CLIP LVL [–15% to +15%] For correcting the amount of red for the

M WHITE CLIP LVL.

B WHITE CLIP LVL [–15% to +15%] For correcting the amount of blue for the

M WHITE CLIP LVL.

- 25 (E) -

Image 26

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Adjust the black balance Operation procedureAdjust the white balance Start shootingLens iris gain volume adjustment How to adjustFlange back adjustment for zoom lens Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustment Using AK-HRP150G camera controller Setting of menu itemsHow to display the menus TOP menuDetection READY, Active  Maintenance menuBlack Shading Correctdig OFF, onPEDESTAL, Gamma GammaDRS OFF, on Gamma OFF, onBlack Gamma OFF, on Cine Gamma Select Video REC, Film RECFlare OFF, on FlareFlare 000 to 80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC KNEE, White ClipKnee Point Knee Point -25.00% to +25.00%White Clip LVL 90% to 109% Knee Point 80.00% to 107.00%Knee Level 100% to 109% White Clip OFF, on B GainKnee OFF, MANUAL, Auto High Color OFF, onKnee Aperture OFF, on DetailDetail OFF, on Slim Detail OFF, on Detail SourceSkin GET OFF, on Skin Tone DetailSkin Tone DTL OFF, on Iris Level 0 to Iris Mode LENS, CAMGAIN, Auto Iris Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super GainPED Offset -200 to +200 Peak Frequency 0 to35 to 0.75 DRS OFF -10 to +10 DRS on Frame Rate 60 to Frame ModeFrame Rate Range 60-6 Matrix Matrix Table A, BColor Correction Gain Select  Setting menuMode LOW, MID, HIGH, S.GAIN1 toDigital Extender OFF, on Matrix Table OFF, A, BColor Correction OFF, on BAR SELAWB Active FormatStatus OFF, on AWB OKMenu on BAR OFF, on ABB OKOUT Range RGB FAN OFF, AUTO, onSynchro Scan ShutterShutter Speed GEN-LOCK Input BNC, Dsub GEN-LOCKPIX Defect Auto DetectionProtocol Protocol 1 to Camera ID menu LOAD/STORE from Mode LOAD/STORE File Operation menu Execute Time Code menu ResetPreset Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera