Panasonic AK-HC1500G Skin Tone Detail, Skin Tone DTL OFF, on, Skin GET OFF, on

Page 30

Setting of menu items

MAINTENANCE menu

[7]SKIN TONE DETAIL

�� SKIN TONE DETAIL ��

SKIN TONE DTL	:OFF
SKIN GET	:OFF
SKIN DTL CORING	:5
Y MAX	:190
Y MIN	:010
I CENTER	:055
I WIDTH	:090
Q WIDTH	:010
Q PHASE	:+000

SKIN TONE DTL [OFF, ON]

For turning the SKIN TONE DTL ON or OFF.

SKIN GET [OFF, ON]

When ON is selected, the box cursor is output to the screen center. When the image of the subject’s skin is placed inside the box cursor and the ENTER operation is performed,

I CENTER and Q PHASE are set automatically.

SKIN DTL CORING [0 to 7]

For setting the SKIN TONE DTL coring amount.

Y MAX [0 to 255]

For setting the upper limit of the brightness in the skin tone specification area.

Y MIN [0 to 255]

For setting the lower limit of the brightness in the skin tone specification area.

I CENTER [0 to 255]

For setting the phase of the I axis in the skin tone specification area.

I WIDTH [0 to 255]

For setting the phase width of the I axis in the skin tone specification area.

Q WIDTH [0 to 255]

For setting the phase range of the Q axis in the skin tone specification area.

Q PHASE [–128 to +127]

For setting the phase of the Q axis in the skin tone specification area.

- 29 (E) -

Image 30

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Adjust the black balance Operation procedureAdjust the white balance Start shootingLens iris gain volume adjustment How to adjustFlange back adjustment for zoom lens Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustment Using AK-HRP150G camera controller Setting of menu itemsHow to display the menus TOP menuDetection READY, Active  Maintenance menuBlack Shading Correctdig OFF, onPEDESTAL, Gamma GammaDRS OFF, on Gamma OFF, onBlack Gamma OFF, on Cine Gamma Select Video REC, Film RECFlare Flare 000 toFlare OFF, on 80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC KNEE, White ClipKnee Point Knee Point -25.00% to +25.00%Knee Point 80.00% to 107.00% Knee Level 100% to 109%White Clip LVL 90% to 109% White Clip OFF, on B GainKnee OFF, MANUAL, Auto High Color OFF, onDetail Detail OFF, onKnee Aperture OFF, on Slim Detail OFF, on Detail SourceSkin Tone Detail Skin Tone DTL OFF, onSkin GET OFF, on Iris Level 0 to Iris Mode LENS, CAMGAIN, Auto Iris Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super GainPeak Frequency 0 to 35 to 0.75 DRS OFF -10 to +10 DRS onPED Offset -200 to +200 Frame Mode Frame Rate Range 60-6Frame Rate 60 to Matrix Matrix Table A, BColor Correction Gain Select  Setting menuMode LOW, MID, HIGH, S.GAIN1 toDigital Extender OFF, on Matrix Table OFF, A, BColor Correction OFF, on BAR SELAWB Active FormatStatus OFF, on AWB OKMenu on BAR OFF, on ABB OKOUT Range RGB FAN OFF, AUTO, onShutter Shutter SpeedSynchro Scan GEN-LOCK Input BNC, Dsub GEN-LOCKPIX Defect Auto DetectionProtocol Protocol 1 to Camera ID menu LOAD/STORE from Mode LOAD/STORE File Operation menu ExecuteReset Preset Time Code menu Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera