Panasonic AK-HC1500G operating instructions PEDESTAL, Gamma

Page 22

Setting of menu items

MAINTENANCE menu

[2]PEDESTAL, GAMMA

��PEDESTAL,GAMMA(1/2) ��

M PEDESTAL	:+000
R PEDESTAL	:+000
B PEDESTAL	:+000
M GAMMA	:0.45
R GAMMA	:+00
B GAMMA	:+00
M BLACK GAMMA	:+00
R BLACK GAMMA	:+00
B BLACK GAMMA	:+00
GAMMA	:ON
BLACK GAMMA	:ON

M PEDESTAL [–200 to +200]

For adjusting the black level.

R PEDESTAL [–100 to +100]

For correcting the red in relation to the master pedestal.

B PEDESTAL [–100 to +100]

For correcting the blue in relation to the master pedestal.

When the AK-HRP150G has been connected, M PEDESTAL, R PEDESTAL and B PEDESTAL operations cannot be performed using the menu.

M GAMMA

[0.35 to 0.75 (DRS OFF), –10 to +10 (DRS ON)]

For adjusting the gamma characteristics.

R GAMMA

[–15 to +15 (DRS OFF), –10 to +10 (DRS ON)]

For adjusting the gamma characteristics of the red in relation to the master gamma characteristics.

B GAMMA

[–15 to +15 (DRS OFF), –10 to +10 (DRS ON)] For adjusting the gamma characteristics of the blue in relation to the master gamma characteristics.

M BLACK GAMMA [–31 to +31]

For adjusting the gamma characteristics in the vicinity of the black.

R BLACK GAMMA [–15 to +15]

For adjusting the gamma characteristics of the red in the vicinity of the black in relation to the master gamma characteristics.

- 21 (E) -

Image 22

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Adjust the black balance Operation procedureAdjust the white balance Start shootingLens iris gain volume adjustment How to adjustFlange back adjustment for zoom lens Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustment Using AK-HRP150G camera controller Setting of menu itemsHow to display the menus TOP menuDetection READY, Active  Maintenance menuBlack Shading Correctdig OFF, onPEDESTAL, Gamma GammaDRS OFF, on Gamma OFF, onBlack Gamma OFF, on Cine Gamma Select Video REC, Film RECFlare 000 to FlareFlare OFF, on 80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC KNEE, White ClipKnee Point Knee Point -25.00% to +25.00%Knee Level 100% to 109% Knee Point 80.00% to 107.00%White Clip LVL 90% to 109% White Clip OFF, on B GainKnee OFF, MANUAL, Auto High Color OFF, onDetail OFF, on DetailKnee Aperture OFF, on Slim Detail OFF, on Detail SourceSkin Tone DTL OFF, on Skin Tone DetailSkin GET OFF, on Iris Level 0 to Iris Mode LENS, CAMGAIN, Auto Iris Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain35 to 0.75 DRS OFF -10 to +10 DRS on Peak Frequency 0 toPED Offset -200 to +200 Frame Rate Range 60-6 Frame ModeFrame Rate 60 to Matrix Matrix Table A, BColor Correction Gain Select  Setting menuMode LOW, MID, HIGH, S.GAIN1 toDigital Extender OFF, on Matrix Table OFF, A, BColor Correction OFF, on BAR SELAWB Active FormatStatus OFF, on AWB OKMenu on BAR OFF, on ABB OKOUT Range RGB FAN OFF, AUTO, onShutter Speed ShutterSynchro Scan GEN-LOCK Input BNC, Dsub GEN-LOCKPIX Defect Auto DetectionProtocol Protocol 1 to Camera ID menu LOAD/STORE from Mode LOAD/STORE File Operation menu ExecutePreset Reset Time Code menu Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera