Panasonic AK-HC1500G Operation procedure, Adjust the white balance, Adjust the black balance

Page 16

Operation procedure

1Turn on the power of each equipment.

2Properly adjust the light for the object.

3Adjust the flange back of the lens, the iris and the focus.

Flange back must be adjusted when the camera is used for the first time or after replacement of the lens.

4Adjust the white balance.

This adjustment is needed when the camera is used for the first time or after leaving unused for a long time.

The adjustment is necessary when the lighting condition or brightness is changed.

After adjusting the white balance once, re-adjustment is not needed under the same condition.

5Adjust the black balance.

This adjustment is needed when the camera is used for the first time or after leaving unused for a long time.

The adjustment is necessary when the ambient temperature is greatly changed or at the change of season.

After adjusting the black balance once, re-adjustment is not needed under the same condition.

6Start shooting.

(After shooting, be sure to turn off the power of each equipment connected.)

- 15 (E) -

Image 16

Contents AK-HC1500G Multi Purpose CameraEnglish Version FCC NoteEnglish Important Safety Instructions For business users in the European Union Contents AccessoriesCharacteristics IntroductionPrecautions for use  Cooling fanFront view Bottom view Rear viewMajor operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connectorHow to set up the system Configuration example 1 Connection of camera controllerConfiguration example 2 High-Speed P/T system Operation procedure Adjust the white balanceAdjust the black balance Start shootingHow to adjust Flange back adjustment for zoom lensLens iris gain volume adjustment Auto iris power zoom lensWhite balance adjustment Color temperature and white balance adjustment referenceBlack balance adjustment Gen-lock adjustmentSetting of menu items How to display the menus Using AK-HRP150G camera controller TOP menu Maintenance menu Black ShadingDetection READY, Active Correctdig OFF, onPEDESTAL, Gamma GammaGamma OFF, on Black Gamma OFF, onDRS OFF, on Cine Gamma Select Video REC, Film RECFlare 000 to FlareFlare OFF, on KNEE, White Clip Knee Point80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC Knee Point -25.00% to +25.00%Knee Level 100% to 109% Knee Point 80.00% to 107.00%White Clip LVL 90% to 109% B Gain Knee OFF, MANUAL, AutoWhite Clip OFF, on High Color OFF, onDetail OFF, on DetailKnee Aperture OFF, on Slim Detail OFF, on Detail SourceSkin Tone DTL OFF, on Skin Tone DetailSkin GET OFF, on Iris Mode LENS, CAM GAIN, Auto IrisIris Level 0 to Iris PEAK/AVE 0 toMode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain35 to 0.75 DRS OFF -10 to +10 DRS on Peak Frequency 0 toPED Offset -200 to +200 Frame Rate Range 60-6 Frame ModeFrame Rate 60 to Matrix Matrix Table A, BColor Correction  Setting menu ModeGain Select LOW, MID, HIGH, S.GAIN1 toMatrix Table OFF, A, B Color Correction OFF, onDigital Extender OFF, on BAR SELFormat Status OFF, onAWB Active AWB OKABB OK OUT Range RGBMenu on BAR OFF, on FAN OFF, AUTO, onShutter Speed ShutterSynchro Scan GEN-LOCK PIX DefectGEN-LOCK Input BNC, Dsub Auto DetectionProtocol Protocol 1 to Camera ID menu Mode LOAD/STORE  File Operation menuLOAD/STORE from ExecutePreset Reset Time Code menu Menu list 47 E 48 E Appearance Unit inch mmSpecifications Input/output signalAppendix Control cable for information camera